- Practice
- About 16 min
- 5 practice questions
Impact identification methods: checklists, matrices, networks and overlays
Choose the right identification method for a task, read a simple interaction matrix, and compare sites with a weighted scoring table.
If something looks wrong, please tell us.
Before impacts can be predicted, they must be identified, and identifying them systematically is harder than it sounds: the obvious impacts are easy, the indirect ones are easily missed. EIA practice uses four families of methods. Questions ask which method fits a description, what each is good and bad at, and sometimes a short scoring calculation. All scores in this lesson are illustrative.
The four families
| Method | How it works | Strength | Weakness |
|---|---|---|---|
| Checklist | A list of environmental factors to tick or describe | Simple, quick, nothing major forgotten | Does not show cause and effect or indirect impacts |
| Matrix | Project actions on one axis, environmental factors on the other; each cell marks an interaction | Links actions to factors; can score magnitude and importance | Mostly direct impacts; scoring is subjective |
| Network | Chains of cause and effect drawn as a tree | Reveals indirect and higher-order impacts | Can become large and complex |
| Overlay | Transparent or digital map layers stacked over one another | Shows spatial patterns; good for route and site selection | Poor at non-spatial impacts such as social change |
The best-known matrix is the Leopold matrix, developed in the United States in 1971, in which each cell records a magnitude and an importance. Overlay mapping was popularised by the landscape planner Ian McHarg and is now done with geographic information systems (GIS). In practice, studies combine methods: a checklist to be complete, a matrix to link actions to factors, a network to trace indirect effects and overlays to choose sites.
Worked example 1: which method?
'A study traces how clearing a hillside forest leads to soil erosion, then to silt in a reservoir, then to reduced storage, then to less irrigation downstream.' The key feature is a chain of cause and effect with several links, which is exactly what a network shows. A checklist would list 'soil' and 'water' but not the chain; a matrix would mark forest clearing against soil but would not show the reservoir and irrigation effects further down the chain. Answer: network.
Weighted scoring for comparing sites
When choosing between alternatives, a common practical tool gives each environmental factor a weight showing its importance, scores each site on each factor for the size of its impact, multiplies, and adds. The site with the lowest total impact is preferred, provided no single score breaks a firm limit.
Worked example 2: comparing two sites
Weights: forest 5, water 4, people displaced 3. Impact scores from 0 (none) to 5 (severe). Site A: forest 2, water 4, people 1. Site B: forest 4, water 1, people 2. Site A total = 5×2 + 4×4 + 3×1 = 10 + 16 + 3 = 29. Site B total = 5×4 + 4×1 + 3×2 = 20 + 4 + 6 = 30. Site A has the lower total impact, 29 against 30, so it is preferred on this scoring, though the margin is small. Notice how sensitive the result is: if the water weight were 5 instead of 4, site A would total 33 and site B 31, and the preference would flip. That is why scoring tables should be shown openly and tested with different weights.
Checklist = completeness. Matrix = action × factor interactions. Network = cause-and-effect chains (indirect impacts). Overlay = maps (spatial patterns, siting). Weighted total = Σ (weight × score).
A practical caution applies to every method: none of them is better than the knowledge put into it. A checklist written for dams will miss issues specific to a port; a matrix filled in by one person reflects that person's judgement; a network stops where its author's understanding stops. Good practice therefore uses a mix of methods, involves specialists from different fields, and invites local people to add impacts the experts have not thought of.
Key takeaways: match the method to the task: completeness suggests a checklist, interactions a matrix, indirect chains a network and spatial siting an overlay; the Leopold matrix scores magnitude and importance; weighted scoring helps compare alternatives but depends on the chosen weights, so the weights must be stated and tested.
Check your understanding
-
1. Which method is best suited to revealing indirect, higher-order impacts through chains of cause and effect?
- Simple checklist
- Network
- Overlay
- Questionnaire survey of costs
Show answer
Answer: B. Networks draw cause-and-effect chains, so they reveal indirect impacts that checklists and simple matrices miss.
-
2. The Leopold matrix records, for each interaction between a project action and an environmental factor:
- Magnitude and importance
- Cost and profit
- Latitude and longitude
- Population and income
Show answer
Answer: A. Each cell of the Leopold matrix has a magnitude score and an importance score.
-
3. Choosing a pipeline route that avoids forests, wetlands and villages by stacking maps of each is an example of:
- Overlay method
- Checklist method
- Network method
- Cost-benefit analysis
Show answer
Answer: A. Stacking map layers to see spatial constraints is the overlay method, now done in GIS.
-
4. Weights: air 3, water 5. Site X scores air 4, water 2; site Y scores air 1, water 4 (higher = worse impact). Which site has the lower weighted impact?
- Site Y, 23 against 22
- Site X, 6 against 5
- Site X, 22 against 23
- They are equal
Show answer
Answer: C. X = 3×4 + 5×2 = 12 + 10 = 22. Y = 3×1 + 5×4 = 3 + 20 = 23. X is lower.
-
5. A main weakness of a simple checklist is that it:
- Is too complex to use
- Does not show cause-and-effect links or indirect impacts
- Can only be used with maps
- Always overstates impacts
Show answer
Answer: B. Checklists are simple and complete but list factors without showing how impacts arise or chain together.
Sign in to keep track of the lessons you finish.