• Practice
  • About 15 min
  • 5 practice questions

Addition polymers: monomers, conditions and quick calculations

Match each common addition polymer to its monomer and method, and calculate degree of polymerisation and element percentages in seconds.

If something looks wrong, please tell us.

Most polymer questions in competitive exams are matching questions: polymer to monomer, polymer to use, polymer to catalyst. The addition polymers are the largest group, and the facts are few enough to learn as one table. The calculations that go with them are also short, because an addition polymer has exactly the same formula per repeating unit as its monomer. This lesson builds on the classification from lesson 1.

How addition polymerisation works

A monomer with a C=C double bond opens the double bond and links to its neighbours: n CH2=CH2 gives –(CH2–CH2)n–. The most common route is free radical polymerisation, started by an initiator such as benzoyl peroxide. The initiator forms a radical, the radical adds to a monomer, the new larger radical adds to another monomer (chain propagation), and the chain stops when two radicals meet (termination). Because no atom is lost, the mass of the polymer equals the total mass of monomer used.

The table to learn

Common addition polymers
PolymerMonomerNotes and uses
Low density polytheneEtheneHigh pressure, traces of oxygen or peroxide, free radical; branched; squeeze bottles, insulation
High density polytheneEtheneZiegler-Natta catalyst (triethylaluminium with titanium tetrachloride), low pressure; linear; buckets, pipes
PolypropenePropeneRopes, toys, pipes
PVCVinyl chloride (chloroethene)Pipes, rain coats, hand bags
PolystyreneStyrene (phenylethene)Insulation, packaging, radio and television cabinets
Teflon (PTFE)TetrafluoroetheneChemically inert; non-stick coatings, oil seals and gaskets
Polyacrylonitrile (PAN)AcrylonitrileSubstitute for wool (orlon, acrilan)

Two traps. First, both kinds of polythene come from the same monomer; they differ in the conditions, the mechanism and therefore the chain shape. Second, polyacrylonitrile is used as a substitute for wool, while nylon and terylene are the condensation fibres; do not mix the two families.

Calculating degree of polymerisation

For an addition homopolymer, degree of polymerisation n = molar mass of polymer ÷ molar mass of monomer. Learn the monomer molar masses using C = 12, H = 1, Cl = 35.5, F = 19, N = 14: ethene 28, propene 42, vinyl chloride 62.5, tetrafluoroethene 100, acrylonitrile 53, styrene 104 g/mol.

Worked example 1

A sample of PVC has an average molar mass of 62,500 g/mol. Find its degree of polymerisation and the percentage of chlorine by mass. The monomer CH2=CHCl has molar mass 2 × 12 + 3 × 1 + 35.5 = 62.5 g/mol. So n = 62,500 ÷ 62.5 = 1000. The percentage of chlorine is the same in the polymer as in the monomer, because no atoms are lost: 35.5 ÷ 62.5 × 100 = 56.8%. Notice you never need the polymer's molar mass for the percentage.

Worked example 2

How many monomer molecules make one chain of Teflon of molar mass 50,000 g/mol, and what mass of tetrafluoroethene is needed to make 2.5 kg of Teflon? CF2=CF2 has molar mass 2 × 12 + 4 × 19 = 100 g/mol, so n = 50,000 ÷ 100 = 500 units per chain. For the mass: in addition polymerisation nothing is lost, so 2.5 kg of polymer needs exactly 2.5 kg of monomer. Many students multiply by n here; the chain length has nothing to do with the total mass.

Addition polymer: repeating unit = monomer. Degree of polymerisation = polymer molar mass ÷ monomer molar mass, and mass of polymer = mass of monomer used.

Key takeaways

  • LDPE and HDPE both come from ethene: free radical and branched versus Ziegler-Natta and linear.
  • Teflon is from tetrafluoroethene, PAN from acrylonitrile, PVC from vinyl chloride.
  • Element percentages of an addition polymer equal those of its monomer.
  • Total mass is conserved in addition polymerisation.

Check your understanding

  1. 1. High density polythene is made using:

    1. Benzoyl peroxide at very high pressure
    2. Ziegler-Natta catalyst
    3. Persulphate catalyst
    4. Sulphur at 400 K
    Show answer

    Answer: B. HDPE is made with a Ziegler-Natta catalyst (triethylaluminium and titanium tetrachloride) at low pressure, giving linear chains.

  2. 2. A polypropene sample has molar mass 42,000 g/mol. Its degree of polymerisation is:

    1. 100
    2. 500
    3. 1000
    4. 1500
    Show answer

    Answer: C. Propene C3H6 = 3 × 12 + 6 = 42 g/mol. n = 42,000 ÷ 42 = 1000.

  3. 3. The percentage of fluorine by mass in Teflon is:

    1. 76%
    2. 38%
    3. 19%
    4. 50%
    Show answer

    Answer: A. CF2=CF2: 76 g of F in 100 g. Percentage = 76%. The polymer has the same composition as the monomer.

  4. 4. Which polymer is used as a substitute for wool?

    1. Polystyrene
    2. Teflon
    3. PVC
    4. Polyacrylonitrile
    Show answer

    Answer: D. Polyacrylonitrile (sold as orlon or acrilan) is the wool substitute; it is made from acrylonitrile by addition polymerisation.

  5. 5. What mass of styrene is needed to make 520 g of polystyrene by addition polymerisation?

    1. 5 g
    2. 104 g
    3. 520 g
    4. 1040 g
    Show answer

    Answer: C. No atoms are lost in addition polymerisation, so the mass of monomer equals the mass of polymer: 520 g.

Privacy · Terms · Refunds · Delivery