• Practice
  • About 14 min
  • 5 practice questions

Mixed polymer problems: identification, elimination and traps

Identify a polymer from its percentage composition, test for unsaturation, and combine classification with calculation in the multi-step questions that close this chapter.

If something looks wrong, please tell us.

The hardest polymer questions in exams combine two ideas: a calculation that identifies the polymer and a classification or property that finishes the answer. This lesson trains that combination. It uses the facts from the whole course, so if a step feels unfamiliar, go back to the matching lesson. The method is always the same: extract the clue, turn it into a formula or a class, and check that no option has a second defensible answer.

Identifying a polymer from its composition

Because an addition polymer has the same formula per unit as its monomer, the percentage composition of the polymer is that of the monomer. Divide each percentage by the atomic mass to get a ratio of atoms. Then compare with the candidate repeating units. A polymer with 26.4% nitrogen points to polyacrylonitrile, because the repeating unit CH2–CHCN (C3H3N, 53 g/mol) has 14 ÷ 53 = 26.4% nitrogen. Nylon 6,6, whose repeating unit has two nitrogen atoms in 226 g/mol, has only 28 ÷ 226 = 12.4% nitrogen.

Worked example 1: a trap in the formula

A hydrocarbon polymer contains 85.7% carbon and 14.3% hydrogen by mass. Atom ratio: 85.7 ÷ 12 = 7.14 for carbon and 14.3 ÷ 1 = 14.3 for hydrogen, so C : H = 1 : 2 and the empirical formula is CH2. Polythene fits (repeating unit CH2CH2), but so does polypropene (C3H6 per unit) and any polymer of an alkene. The composition alone cannot distinguish them, so a question that gives only this data and asks for 'the' polymer must give another clue. Do not choose polythene just because it is the first to come to mind.

Worked example 2: chlorine in neoprene

Neoprene is made from chloroprene, CH2=C(Cl)–CH=CH2, C4H5Cl. Its molar mass is 4 × 12 + 5 + 35.5 = 88.5 g/mol. Chlorine = 35.5 ÷ 88.5 × 100 = 40.1% by mass, the same in the polymer. A 1.77 kg sample therefore contains 0.401 × 1770 = 710 g of chlorine.

Testing for unsaturation

Polymers that still contain C=C bonds in the chain, such as natural rubber and Buna-S, decolourise bromine water or take up hydrogen. Polythene, PVC, Teflon and polystyrene have a saturated backbone and do not. In polystyrene the benzene ring is not an ordinary C=C double bond and does not react with bromine under mild conditions. This gives a quick laboratory test to tell, say, natural rubber from polythene.

Worked example 3: bromine and rubber

6.8 g of natural rubber (isoprene unit 68 g/mol) reacts with bromine. Moles of units = 6.8 ÷ 68 = 0.1 mol, each with one C=C, so 0.1 mol of Br2 is consumed. Mass of bromine = 0.1 × 160 = 16 g. Polythene of the same mass would consume none.

A decision routine for multi-step questions

  1. Is the backbone all carbon (addition) or does it contain amide or ester links (condensation)?
  2. Does it contain C=C, and so react with bromine? Does it contain a heteroatom, and so show up in an element analysis?
  3. Is it cross-linked (thermosetting), linear (fibre or thermoplastic) or lightly cross-linked (elastomer)?
  4. Does a calculation need the formula of the repeating unit (addition: the monomer; condensation: monomers minus water)?

Composition tells you the repeating unit; a test for C=C tells you the saturation; the backbone tells you the type. Use all three clues before you choose an option.

Key takeaways

  • An addition polymer has the monomer's percentage composition.
  • Nitrogen percentage separates polyacrylonitrile (26.4%) from nylon 6,6 (12.4%).
  • Several polymers can share an empirical formula, so one number may not be enough.
  • Only polymers with C=C left in the chain, such as natural rubber and Buna-S, decolourise bromine water.

Check your understanding

  1. 1. A polymer has 26.4% nitrogen by mass (C = 12, H = 1, N = 14). It is most likely:

    1. Nylon 6,6 (a polyamide)
    2. Polyacrylonitrile (Orlon)
    3. Buna-N (a copolymer)
    4. Nylon 6 (a polyamide)
    Show answer

    Answer: B. Polyacrylonitrile, C3H3N per unit (53 g/mol), has 14 ÷ 53 = 26.4% nitrogen. Nylon 6,6 has 28 ÷ 226 = 12.4% N and Nylon 6 has 14 ÷ 113 = 12.4%. Buna-N, a copolymer with butadiene, contains less nitrogen.

  2. 2. The percentage of chlorine by mass in neoprene is about:

    1. 56.8%
    2. 35.5%
    3. 40.1%
    4. 28.4%
    Show answer

    Answer: C. The unit is C4H5Cl, molar mass 88.5. Chlorine = 35.5 ÷ 88.5 × 100 = 40.1%. The value 56.8% is chlorine in PVC (35.5 ÷ 62.5).

  3. 3. A polymer of composition 85.7% C and 14.3% H by mass (empirical formula CH2) must be:

    1. Polythene only, the simplest alkene polymer
    2. Polypropene only, with the larger repeating unit
    3. Polythene, polypropene or another alkene polymer
    4. Polystyrene, which also contains only C and H
    Show answer

    Answer: C. Many alkene polymers have the empirical formula CH2, including polythene and polypropene. Polystyrene is C8H8 per unit, i.e. CH, so it is excluded.

  4. 4. How many moles of bromine react with 13.6 g of natural rubber (68 g/mol per isoprene unit)?

    1. 0.1 mol
    2. 0.5 mol
    3. 0.2 mol
    4. 0.4 mol
    Show answer

    Answer: C. Moles of isoprene units = 13.6 ÷ 68 = 0.2 mol, each unit carrying one C=C, so 0.2 mol of Br2 adds.

  5. 5. Which polymer does NOT decolourise bromine water?

    1. Natural rubber
    2. Polythene
    3. Buna-S
    4. Polybutadiene
    Show answer

    Answer: B. Polythene has a saturated carbon backbone. Natural rubber, Buna-S and polybutadiene all retain a C=C in each diene unit.

Privacy · Terms · Refunds · Delivery