- Practice
- About 14 min
- 5 practice questions
Classifying polymers: the four ways and the traps
Sort any polymer by source, structure, mode of polymerisation and intermolecular forces, and avoid the classification traps that catch most students.
If something looks wrong, please tell us.
Classification questions on polymers look easy and are lost easily. The same polymer can be described in four different ways, and an option that is true under one scheme is often offered as the answer to a question about another. This lesson sets out the four schemes side by side, practises them on the polymers that appear most often, and names the traps so you can spot them under time pressure.
What a polymer is
A polymer is a very large molecule (a macromolecule) built by joining many small repeating units. The small molecules that join are called monomers, and the joining process is polymerisation. Polythene, for example, is made from thousands of ethene molecules joined end to end. The number of repeating units in one chain is the degree of polymerisation. Every polymer is a macromolecule, but not every macromolecule is a polymer: a very large molecule with no repeating unit does not qualify.
Scheme 1: by source
Natural polymers come from plants and animals: starch, cellulose, proteins and natural rubber. Semi-synthetic polymers are natural polymers that have been chemically modified, such as cellulose acetate (rayon) and cellulose nitrate. Synthetic polymers are made entirely in the laboratory or factory: polythene, nylon 6,6, Buna-S and PVC. The trap here is rayon: it is a fibre made in a factory, so students call it synthetic, but it starts from cellulose and is semi-synthetic.
Scheme 2: by structure
Linear polymers have long straight chains that pack closely, giving high density and high melting point; high density polythene and PVC are examples. Branched-chain polymers carry side branches that stop close packing, so they are less dense and melt lower; low density polythene is the standard example. Cross-linked (network) polymers have strong covalent bonds joining neighbouring chains into a three-dimensional net, making them hard, rigid and brittle; Bakelite and melamine-formaldehyde resin are the examples to remember.
Scheme 3: by mode of polymerisation
In addition polymerisation, unsaturated monomers (usually with a C=C double bond) join without losing any atoms, so the polymer has the same empirical formula as the monomer. If one kind of monomer is used, the product is a homopolymer (polythene); if two kinds, a copolymer (Buna-S). In condensation polymerisation, two monomers each with two reactive groups join and lose a small molecule such as water, alcohol or hydrogen chloride at every link. Nylon 6,6, terylene and Bakelite are condensation polymers.
Scheme 4: by molecular forces
| Class | Forces between chains | Typical behaviour | Examples |
|---|---|---|---|
| Elastomers | Weakest van der Waals forces, a few cross-links | Stretch and return to shape | Natural rubber (vulcanised), Buna-S, Buna-N, neoprene |
| Fibres | Strong forces such as hydrogen bonds | High tensile strength, thread-forming | Nylon 6,6, terylene |
| Thermoplastics | Intermediate forces | Soften on heating, harden on cooling, repeatedly | Polythene, polystyrene, PVC |
| Thermosetting polymers | Extensive cross-linking formed on heating | Set permanently; cannot be remoulded | Bakelite, urea-formaldehyde resin |
Worked example 1
Classify nylon 6,6 in all four schemes. Source: it is made from hexamethylenediamine and adipic acid in a factory, so it is synthetic. Structure: its chains are linear. Mode: each amide link forms with loss of a water molecule, so it is a condensation polymer, and since two different monomers are used it is also a copolymer. Forces: hydrogen bonds between N–H and C=O groups of neighbouring chains make it a fibre. Writing all four answers in one line like this is the fastest way to handle a 'which statement is incorrect' question.
Worked example 2
Which is the odd one out: polythene, PVC, Bakelite, polystyrene? Check each scheme in turn. All four are synthetic, so source does not separate them. Three are thermoplastics that can be softened and remoulded; Bakelite is cross-linked and thermosetting. The odd one out is therefore Bakelite. A good habit: when an 'odd one out' list does not split on the first scheme you try, move to the next scheme rather than guessing.
Four questions for every polymer: Where does it come from? What shape are its chains? Did it lose a small molecule as it formed? How strongly do its chains hold each other?
Key takeaways
- Semi-synthetic means a natural polymer chemically modified: rayon is the classic trap.
- Branching lowers density and melting point; cross-linking makes a polymer hard and thermosetting.
- Addition polymers keep the monomer's formula; condensation polymers lose a small molecule per link.
- Elastomer < thermoplastic < fibre in strength of inter-chain forces; thermosets are fixed by cross-links.
Check your understanding
-
1. Cellulose acetate (rayon) is best classified by source as:
- Natural
- Semi-synthetic
- Synthetic
- Inorganic
Show answer
Answer: B. Rayon is made by chemically modifying cellulose, a natural polymer, so it is semi-synthetic, not fully synthetic.
-
2. Which polymer is cross-linked?
- High density polythene
- PVC
- Polystyrene
- Bakelite
Show answer
Answer: D. Bakelite forms a three-dimensional network of covalent cross-links when heated, which makes it thermosetting. The other three are linear thermoplastics.
-
3. Low density polythene is less dense than high density polythene mainly because its chains are:
- Branched, so they cannot pack closely
- Cross-linked
- Shorter by half
- Held by hydrogen bonds
Show answer
Answer: A. Branches stop the chains lying close together, so there is more empty space per unit volume and the density is lower.
-
4. Which class has the weakest intermolecular forces?
- Fibres
- Thermosetting polymers
- Elastomers
- Thermoplastics
Show answer
Answer: C. Elastomers have the weakest (van der Waals) forces between chains, which lets them stretch; a few cross-links pull them back.
-
5. A polymer forms from two different monomers with loss of water at every link. It is:
- An addition homopolymer
- An addition copolymer
- A natural polymer
- A condensation copolymer
Show answer
Answer: D. Loss of a small molecule at each link means condensation; two different monomers make it a copolymer. Nylon 6,6 and terylene are examples.
Sign in to keep track of the lessons you finish.