- Practice
- About 13 min
- 5 practice questions
Matching polymers to properties, uses and trade names
Link each common polymer to its trade names, key property and typical use, and use property reasoning to answer 'which polymer is suitable for...' questions.
If something looks wrong, please tell us.
Matching questions are the commonest polymer questions in competitive exams: a polymer on the left, a use or a trade name on the right. Learning a bare list is fragile, because one forgotten pair spoils the whole matching. A better method is to attach each use to a property that follows from the structure, so you can rebuild the pair even if memory fails. This lesson gives the grid and the reasoning behind it, and it builds on the classification and monomers from the earlier lessons.
The grid to know
| Polymer | Trade or common names | Key property | Typical uses |
|---|---|---|---|
| Polytetrafluoroethene (PTFE) | Teflon | Chemically inert, very low friction, high melting point | Non-stick coatings, gaskets, oil seals |
| Polyacrylonitrile (PAN) | Orlon, Acrilan | Soft, warm, wool-like fibre | Substitute for wool, blankets, knitwear |
| Polyester of ethylene glycol and terephthalic acid | Terylene, Dacron | Strong, crease-resistant fibre | Fabrics blended with cotton or wool |
| Poly(methyl methacrylate) (PMMA) | Perspex, Plexiglas | Transparent, light, shatter-resistant | Lenses, sign boards, aircraft windows |
| Polystyrene | Thermocol when expanded | Light, poor conductor of heat | Packaging, insulation |
| Polyvinyl chloride (PVC) | PVC | Tough, flexible when plasticised | Pipes, raincoats, cable insulation |
| Nylon 6,6 and nylon 6 | Nylon | Strong fibre, hydrogen bonds between chains | Ropes, tyre cords, fabrics, brush bristles |
| Phenol-formaldehyde resin | Bakelite | Hard, cross-linked, does not soften on heating | Switches, handles, combs |
Reasoning from structure to use
Teflon has strong C–F bonds and a shielding sheath of fluorine atoms, so almost nothing reacts with it or sticks to it: that is why it coats frying pans. PMMA has bulky side groups that stop the chains from packing into crystals, so light passes through and the plastic is clear. Polystyrene foam holds a great deal of trapped air, and air conducts heat poorly, so it insulates. Nylon and terylene are fibres because their chains are long, straight and held side by side by strong forces, which give high tensile strength when drawn into threads. Bakelite is cross-linked in three dimensions, so it cannot flow when heated and is used where heat resistance and hardness matter.
Plasticisers show the same logic. Pure PVC is rigid because its chains pack tightly. Mixing it with small molecules called plasticisers pushes the chains apart, weakens the forces between them, and gives the flexible PVC used for cable coverings. The polymer is the same; only the forces between chains have changed.
Worked example 1: choosing a polymer
Which polymer is best for the coating of a non-stick pan: polythene, PVC, Teflon or Bakelite? Required properties: unreactive, low friction, able to withstand cooking heat. Polythene and PVC soften at modest temperatures and PVC gives off hydrogen chloride on strong heating. Bakelite is heat-resistant but hard and not slippery. Teflon is inert, slippery and stable, so the answer is Teflon.
Worked example 2: the odd one out
Find the odd one out: nylon 6,6, terylene, orlon, Bakelite. Nylon 6,6, terylene and orlon are all drawn into fibres, while Bakelite is a hard moulded resin. By structure, Bakelite is also the only cross-linked, thermosetting polymer among them. The answer is Bakelite.
Worked example 3: a composition check
The repeating unit of PMMA is C5H8O2 (the monomer is methyl methacrylate, and no atoms are lost on polymerisation). Its molar mass is 5 × 12 + 8 × 1 + 2 × 16 = 100 g/mol. The mass percentages are carbon 60 ÷ 100 = 60%, hydrogen 8%, oxygen 32%. A PMMA chain of molar mass 50,000 g/mol therefore has 50,000 ÷ 100 = 500 repeating units.
Do not memorise pairs alone: attach each use to a property that follows from the structure, such as inertness for Teflon, clarity for PMMA, trapped air for foam and cross-linking for Bakelite.
Key takeaways
- Teflon is PTFE; Orlon is polyacrylonitrile; Terylene and Dacron are the same polyester; Perspex is PMMA.
- Fibres have strong forces between straight chains; thermosets are cross-linked; foams insulate because of trapped air.
- Plasticisers make PVC flexible by weakening the forces between chains.
- Addition polymers keep the monomer's formula, so element percentages come from the monomer.
Check your understanding
-
1. Which polymer is known as Teflon?
- Polyacrylonitrile
- Polytetrafluoroethene
- Polyvinyl chloride
- Polystyrene
Show answer
Answer: B. Teflon is the trade name of PTFE, polytetrafluoroethene, made from CF2=CF2.
-
2. Orlon (Acrilan) is used as a substitute for wool. It is a polymer of:
- Styrene
- Vinyl chloride
- Ethylene glycol
- Acrylonitrile
Show answer
Answer: D. Orlon and Acrilan are trade names of polyacrylonitrile, made by addition polymerisation of acrylonitrile, CH2=CHCN.
-
3. The percentage of oxygen by mass in poly(methyl methacrylate), repeating unit C5H8O2 (C = 12, H = 1, O = 16), is:
- 16%
- 60%
- 8%
- 32%
Show answer
Answer: D. Molar mass of the repeating unit = 60 + 8 + 32 = 100. Oxygen = 32 ÷ 100 × 100 = 32%. The other options are the percentage of C (60%), of H (8%), and the mass of one oxygen atom (16).
-
4. Which statement about plasticised PVC is correct?
- Plasticisers weaken forces between chains and make it flexible
- Plasticisers cross-link the chains and make it harder
- Plasticisers change the monomer of the polymer
- Plasticisers make the polymer a fibre
Show answer
Answer: A. A plasticiser is a small molecule that sits between chains, pushes them apart and weakens the attractions, so PVC becomes flexible. The polymer itself is not changed.
-
5. A PMMA sample has molar mass 25,000 g/mol. Its degree of polymerisation, with repeating unit mass 100 g/mol, is:
- 250
- 2500
- 25
- 100
Show answer
Answer: A. Degree of polymerisation = 25,000 ÷ 100 = 250. Since no atoms are lost in addition polymerisation, the repeating unit has the same mass as the monomer.
Sign in to keep track of the lessons you finish.