• Practice
  • About 16 min
  • 5 practice questions

Molar mass of polymers and biodegradable polymers

Calculate number-average and weight-average molar masses and the polydispersity index, and identify the monomers of PHBV and nylon-2-nylon-6.

If something looks wrong, please tell us.

A polymer sample is never made of identical chains. Some chains stop growing early and some late, so the sample is a mixture of molar masses, and its molar mass has to be an average. Exams test two averages and the ratio between them, and they often pair this with the biodegradable polymers, which close the topic. This lesson uses the repeating-unit masses from lessons 2 to 4.

Number-average molar mass

If Ni chains have molar mass Mi, the number-average molar mass is Mn = ΣNiMi ÷ ΣNi. It is simply total mass divided by total number of chains, the ordinary average. Each chain counts once, however heavy it is. Methods that count particles, such as osmotic pressure, give Mn.

Weight-average molar mass

The weight-average molar mass is Mw = ΣNiMi² ÷ ΣNiMi. Here each chain is weighted by its own mass, so heavy chains count for more. Methods that depend on the size of molecules, such as light scattering, give Mw. Because of this extra weighting, Mw is always greater than or equal to Mn.

Polydispersity index

The polydispersity index PDI = Mw ÷ Mn. If every chain has the same mass, Mw = Mn and PDI = 1; such a sample is monodisperse, which is typical of many natural polymers like proteins. Synthetic polymers have PDI greater than 1. A PDI below 1 is impossible, so an option giving one is wrong without calculation.

Worked example 1

A sample has 30 chains of molar mass 20,000 g/mol and 20 chains of 50,000 g/mol. ΣNiMi = 30 × 20,000 + 20 × 50,000 = 600,000 + 1,000,000 = 1,600,000. ΣNi = 50. So Mn = 1,600,000 ÷ 50 = 32,000 g/mol. ΣNiMi² = 30 × (2 × 10⁴)² + 20 × (5 × 10⁴)² = 30 × 4 × 10⁸ + 20 × 25 × 10⁸ = 120 × 10⁸ + 500 × 10⁸ = 6.2 × 10¹⁰. Mw = 6.2 × 10¹⁰ ÷ 1.6 × 10⁶ = 38,750 g/mol. PDI = 38,750 ÷ 32,000 ≈ 1.21.

Worked example 2: a speed method

Equal numbers of chains of 10,000 and 30,000 g/mol are mixed. With equal numbers, Mn is the plain average: 20,000 g/mol. For Mw, take one chain of each: ΣNiMi² = 10⁸ + 9 × 10⁸ = 10⁹ and ΣNiMi = 40,000, so Mw = 10⁹ ÷ 40,000 = 25,000 g/mol. PDI = 25,000 ÷ 20,000 = 1.25. Using 'one of each' instead of large counts keeps the numbers small; only the ratio of counts matters.

Biodegradable polymers

Ordinary polymers resist breakdown and persist as waste. Biodegradable polymers contain groups, usually ester or amide links in aliphatic chains, that microorganisms and water can break. Two are named in textbooks. PHBV (poly-β-hydroxybutyrate-co-β-hydroxyvalerate) is a copolymer of 3-hydroxybutanoic acid and 3-hydroxypentanoic acid; it is used in specialty packaging, orthopaedic devices and controlled release of drugs. Nylon-2-nylon-6 is an alternating polyamide copolymer of glycine (H2N–CH2–COOH) and aminocaproic acid (H2N–(CH2)5–COOH). The numbers again count carbons: glycine has 2, aminocaproic acid has 6.

Mn = ΣNiMi ÷ ΣNi; Mw = ΣNiMi² ÷ ΣNiMi; PDI = Mw ÷ Mn ≥ 1, equal to 1 only when all chains are the same.

Key takeaways

  • Mn counts every chain once; Mw favours heavy chains; Mw ≥ Mn.
  • PDI = 1 means monodisperse, typical of natural polymers such as proteins.
  • PHBV: 3-hydroxybutanoic + 3-hydroxypentanoic acid. Nylon-2-nylon-6: glycine + aminocaproic acid.
  • For equal numbers of chains, use one chain of each to keep arithmetic small.

Check your understanding

  1. 1. Equal numbers of chains of molar mass 20,000 and 40,000 g/mol are mixed. Mn is:

    1. 25,000 g/mol
    2. 30,000 g/mol
    3. 33,333 g/mol
    4. 40,000 g/mol
    Show answer

    Answer: B. With equal numbers, Mn is the plain average: (20,000 + 40,000) ÷ 2 = 30,000 g/mol.

  2. 2. For the same mixture (equal numbers of 20,000 and 40,000 g/mol chains), Mw is about:

    1. 30,000 g/mol
    2. 36,000 g/mol
    3. 33,333 g/mol
    4. 26,667 g/mol
    Show answer

    Answer: C. One chain of each: ΣNiMi² = 4 × 10⁸ + 16 × 10⁸ = 2 × 10⁹; ΣNiMi = 60,000. Mw = 2 × 10⁹ ÷ 6 × 10⁴ ≈ 33,333 g/mol.

  3. 3. Which value of PDI is impossible?

    1. 0.85
    2. 1.00
    3. 1.25
    4. 2.10
    Show answer

    Answer: A. Mw is never smaller than Mn, so PDI = Mw ÷ Mn cannot be below 1. A value of 0.85 is impossible.

  4. 4. The monomers of nylon-2-nylon-6 are:

    1. Glycine and caprolactam only by addition
    2. Adipic acid and hexamethylenediamine
    3. 3-Hydroxybutanoic acid and 3-hydroxypentanoic acid
    4. Glycine and aminocaproic acid
    Show answer

    Answer: D. Nylon-2-nylon-6 is the polyamide copolymer of glycine (2 carbons) and aminocaproic acid (6 carbons); it is biodegradable.

  5. 5. PHBV is used in:

    1. Unbreakable crockery
    2. Non-stick coatings
    3. Orthopaedic devices and controlled drug release
    4. Tyre cords
    Show answer

    Answer: C. PHBV is a biodegradable polyester used in specialty packaging, orthopaedic devices and controlled release of drugs.

Privacy · Terms · Refunds · Delivery