• Practice
  • About 16 min
  • 5 practice questions

Condensation polymers: nylons, polyesters and resins

Identify the monomers and by-products of nylon 6,6, nylon 6, terylene, glyptal, Bakelite and melamine resin, and calculate repeat-unit masses and water released.

If something looks wrong, please tell us.

Condensation polymers carry most of the 'identify the monomer' and 'how much water is released' questions. Unlike addition polymers (lesson 2), each link loses a small molecule, so the repeating unit is lighter than the monomers that make it. Once you learn to write the repeating unit and subtract the lost molecules, every calculation in this area becomes a two-line job.

The rule of two functional groups

For a long chain to grow, each monomer must have at least two reactive groups, one at each end. A diamine reacts with a dicarboxylic acid to give amide links (polyamides, the nylons). A diol reacts with a dicarboxylic acid to give ester links (polyesters). Each new amide or ester link releases one molecule of water. A monomer with three reactive positions, such as phenol reacting at three ring positions with methanal, can cross-link and give a hard network, which is why Bakelite is thermosetting.

The polymers to know

Condensation polymers
PolymerMonomersLink and by-productUses
Nylon 6,6Hexamethylenediamine + adipic acidAmide; waterSheets, bristles for brushes, textiles
Nylon 6Caprolactam (heated with water)Amide; ring openingTyre cords, fabrics, ropes
Terylene (Dacron)Ethylene glycol + terephthalic acidEster; waterFabrics blended with cotton or wool; glass-reinforcing material in safety helmets
GlyptalEthylene glycol + phthalic acidEster; waterPaints and lacquers
BakelitePhenol + methanal (formaldehyde)Methylene bridges; waterCombs, electrical switches, handles of utensils
Melamine-formaldehydeMelamine + methanalWaterUnbreakable crockery

The names of nylons count carbons. In nylon 6,6 the first 6 is the six carbon atoms of the diamine and the second 6 is the six carbon atoms of the acid. Nylon 6 has a single monomer, caprolactam, with six carbons. Phenol and methanal first give a linear product called novolac, used in paints; further heating with methanal cross-links it into Bakelite.

Writing the repeating unit

The repeating unit is the two monomers joined, minus the molecules lost to form two links. For nylon 6,6: hexamethylenediamine C6H16N2 (116 g/mol) plus adipic acid C6H10O4 (146 g/mol) gives 262; two water molecules (36) are lost, so the repeating unit –[NH(CH2)6NHCO(CH2)4CO]– has molar mass 226 g/mol. For terylene: ethylene glycol C2H6O2 (62) plus terephthalic acid C8H6O4 (166) is 228, minus 36 gives 192 g/mol.

Worked example 1

A nylon 6,6 chain has molar mass 22,600 g/mol. About how many repeating units does it contain, and how many water molecules were released in making it? Repeating units = 22,600 ÷ 226 = 100. Each repeating unit contains two amide links, so about 2 × 100 = 200 molecules of water were released (exactly 199 for a single linear chain, since the two chain ends stay unreacted; for long chains, 2n is the accepted approximation).

Worked example 2

What mass of water is released when 1 kg of terylene is made? Moles of repeating units = 1000 ÷ 192 = 5.208 mol. Each unit releases two water molecules, so water = 2 × 5.208 × 18 = 187.5 g. A check by masses: the monomers needed weigh 5.208 × 228 = 1187.5 g, and 1187.5 − 1000 = 187.5 g. The two routes agree.

Condensation polymer: repeating unit = sum of monomers − molecules lost (two water molecules for each diamine-diacid or diol-diacid pair). Mass of monomers > mass of polymer.

Key takeaways

  • Each monomer needs two reactive groups; three allow cross-linking.
  • Nylon numbers count carbons: nylon 6,6 = C6 diamine + C6 diacid.
  • Terylene and glyptal are both polyesters of ethylene glycol: with terephthalic and phthalic acid respectively.
  • Nylon 6,6 repeat unit 226 g/mol; terylene 192 g/mol.

Check your understanding

  1. 1. The monomers of terylene are:

    1. Ethylene glycol and phthalic acid
    2. Hexamethylenediamine and adipic acid
    3. Ethylene glycol and terephthalic acid
    4. Phenol and methanal
    Show answer

    Answer: C. Terylene (Dacron) is the polyester of ethylene glycol and terephthalic acid. Ethylene glycol with phthalic acid gives glyptal.

  2. 2. Which polymer is used to make unbreakable crockery?

    1. Melamine-formaldehyde resin
    2. Glyptal
    3. Novolac
    4. Nylon 6
    Show answer

    Answer: A. Melamine-formaldehyde resin is hard and heat resistant and is the standard material for unbreakable crockery.

  3. 3. The molar mass of the repeating unit of nylon 6,6 is (C = 12, H = 1, N = 14, O = 16):

    1. 262 g/mol
    2. 244 g/mol
    3. 113 g/mol
    4. 226 g/mol
    Show answer

    Answer: D. 116 (diamine) + 146 (adipic acid) − 2 × 18 (two water molecules) = 226 g/mol.

  4. 4. Bakelite is thermosetting because:

    1. It has strong hydrogen bonds
    2. Phenol can react at three positions, so chains cross-link
    3. Its monomer has a triple bond
    4. It is a natural polymer
    Show answer

    Answer: B. Phenol reacts with methanal at more than two ring positions, so methylene bridges join chains into a rigid three-dimensional network.

  5. 5. About how many water molecules are released in forming a terylene chain of molar mass 19,200 g/mol?

    1. 50
    2. 100
    3. 400
    4. 200
    Show answer

    Answer: D. Repeating units = 19,200 ÷ 192 = 100. Each unit has two ester links, so about 2 × 100 = 200 water molecules.

Privacy · Terms · Refunds · Delivery