- Practice
- About 15 min
- 5 practice questions
Copolymers and rubbers: natural, vulcanised and synthetic
Explain the structure of natural rubber and vulcanisation, match Buna-S, Buna-N and neoprene to monomers and uses, and do composition calculations on copolymers.
If something looks wrong, please tell us.
Rubber questions test three things: the structure of natural rubber, what vulcanisation does, and which synthetic rubber comes from which monomers. Synthetic rubbers are also the best examples of copolymers, so this lesson connects back to the addition polymers of lesson 2 and the classification by forces from lesson 1.
Natural rubber
Natural rubber is a linear polymer of isoprene (2-methyl-1,3-butadiene, C5H8, molar mass 68 g/mol). It is called cis-1,4-polyisoprene: monomers join through carbon atoms 1 and 4, and the double bond left in each unit has the cis arrangement. The cis geometry makes the chains coil, and only weak van der Waals forces act between them, which is why rubber is elastic. Each repeating unit still contains one C=C double bond. The trans form, gutta-percha, is hard and not elastic.
Vulcanisation
Raw natural rubber becomes soft and sticky when warm and brittle when cold, absorbs water and dissolves in non-polar solvents. Vulcanisation fixes this: rubber is heated with sulphur and an additive at roughly 373–415 K. Sulphur forms cross-links between chains at the reactive positions next to the double bonds. The cross-links stop chains sliding past each other, so the rubber becomes stiffer, stronger and keeps its shape over a wider temperature range. More sulphur gives harder rubber; tyre rubber uses a few per cent of sulphur.
Synthetic rubbers
| Rubber | Monomer(s) | Type | Uses |
|---|---|---|---|
| Neoprene | Chloroprene (2-chloro-1,3-butadiene) | Homopolymer, free radical | Conveyor belts, gaskets, hoses |
| Buna-S | 1,3-Butadiene + styrene | Copolymer | Autotyres, floor tiles, footwear, cable insulation |
| Buna-N | 1,3-Butadiene + acrylonitrile | Copolymer | Oil seals, tank linings; resists petrol and oils |
Memory aid: Buna = Butadiene + Na (sodium, once used as the catalyst); S for styrene, N for nitrile (acrylonitrile). Neoprene is the one with chlorine. Buna-N's resistance to petrol and oils comes from the polar nitrile groups, which do not mix with non-polar hydrocarbons.
Worked example 1: hydrogenating natural rubber
How many moles of hydrogen are needed to saturate all the double bonds in 6.8 g of natural rubber? Each isoprene unit (68 g/mol) carries one C=C. Moles of units = 6.8 ÷ 68 = 0.1 mol, so there are 0.1 mol of double bonds and 0.1 mol of H2 is needed (0.2 g). The chain length does not matter: count units, not chains.
Worked example 2: composition of Buna-S
A Buna-S sample contains butadiene and styrene units in the mole ratio 3 : 1. Find the mass percentage of styrene units. Butadiene C4H6 = 54 g/mol and styrene C8H8 = 104 g/mol. Mass of one set of 4 units = 3 × 54 + 104 = 162 + 104 = 266 g. Styrene fraction = 104 ÷ 266 × 100 = 39.1%. The average mass per unit is 266 ÷ 4 = 66.5 g/mol, which you would use to find the degree of polymerisation of a copolymer chain.
Natural rubber = cis-1,4-polyisoprene, one C=C per 68 g unit. Vulcanisation = sulphur cross-links. Buna-S: butadiene + styrene; Buna-N: butadiene + acrylonitrile; neoprene: chloroprene.
Key takeaways
- Cis geometry and weak forces make natural rubber elastic.
- Vulcanisation with sulphur adds cross-links, improving strength and temperature range.
- Buna-N resists oils because of its polar nitrile groups.
- For copolymers, compute the mass of one 'set' of units in the given mole ratio.
Check your understanding
-
1. Natural rubber is:
- trans-1,4-polyisoprene
- cis-1,4-polyisoprene
- Polychloroprene
- Poly(1,3-butadiene)
Show answer
Answer: B. Natural rubber is cis-1,4-polyisoprene. The trans form is gutta-percha; polychloroprene is neoprene.
-
2. Buna-N is made from:
- 1,3-Butadiene and acrylonitrile
- 1,3-Butadiene and styrene
- Chloroprene only
- Isoprene and sulphur
Show answer
Answer: A. N stands for nitrile: Buna-N is the copolymer of 1,3-butadiene and acrylonitrile.
-
3. The main effect of vulcanisation is to:
- Remove all double bonds
- Break the chains into shorter ones
- Introduce sulphur cross-links between chains
- Convert cis units to trans
Show answer
Answer: C. Heating with sulphur forms sulphur bridges between chains; the cross-links make the rubber stronger and less temperature-sensitive.
-
4. How many moles of H2 are needed to saturate 13.6 g of natural rubber completely?
- 0.1 mol
- 0.4 mol
- 0.05 mol
- 0.2 mol
Show answer
Answer: D. Moles of isoprene units = 13.6 ÷ 68 = 0.2. Each unit has one C=C, so 0.2 mol H2.
-
5. Which synthetic rubber is chosen for oil seals because it resists petrol and lubricating oil?
- Buna-N
- Neoprene
- Buna-S
- Natural rubber
Show answer
Answer: A. Buna-N contains polar nitrile groups, which make it resistant to non-polar petrol, oils and organic solvents.
Sign in to keep track of the lessons you finish.