- Practice
- About 25 min
- 15 practice questions
Final self-assessment: Polymers practice
Test yourself on the whole course: 15 questions with answers explained.
If something looks wrong, please tell us.
Attempt all 15 questions before you open any explanation, and note the ones you were unsure of, not only the ones you got wrong. Then read every explanation: the working shows the method, and an answer reached by guessing does not count as known.
Final self-assessment
-
1. Which statement is correct?
- Rayon is a synthetic polymer
- Nylon 6,6 is a condensation copolymer and a fibre
- Bakelite is a thermoplastic
- LDPE is linear
Show answer
Answer: B. Nylon 6,6 forms with loss of water from two different monomers (condensation copolymer) and has hydrogen-bonded chains (fibre). Rayon is semi-synthetic, Bakelite is thermosetting and LDPE is branched.
-
2. Arrange in increasing strength of intermolecular forces: fibre, elastomer, thermoplastic.
- Fibre < thermoplastic < elastomer
- Thermoplastic < elastomer < fibre
- Elastomer < fibre < thermoplastic
- Elastomer < thermoplastic < fibre
Show answer
Answer: D. Elastomers have the weakest van der Waals forces, thermoplastics intermediate, fibres the strongest (hydrogen bonds).
-
3. Which pair has the same monomer?
- LDPE and HDPE
- Teflon and PVC
- Nylon 6 and nylon 6,6
- Buna-S and Buna-N
Show answer
Answer: A. Both LDPE and HDPE come from ethene; they differ in conditions and chain shape.
-
4. A PVC sample has degree of polymerisation 800. Its molar mass is:
- 22,400 g/mol
- 40,000 g/mol
- 50,000 g/mol
- 62,500 g/mol
Show answer
Answer: C. Vinyl chloride = 62.5 g/mol. 800 × 62.5 = 50,000 g/mol.
-
5. Percentage of nitrogen by mass in polyacrylonitrile (C = 12, H = 1, N = 14) is about:
- 26.4%
- 14.0%
- 35.5%
- 53.0%
Show answer
Answer: A. Acrylonitrile CH2=CHCN = C3H3N = 36 + 3 + 14 = 53 g/mol. N% = 14 ÷ 53 × 100 ≈ 26.4%, the same in the polymer.
-
6. Making 104 g of polystyrene from styrene releases how much water?
- 18 g
- None
- 36 g
- 9 g
Show answer
Answer: B. Polystyrene is an addition polymer: no small molecule is lost, so no water is released.
-
7. A nylon 6,6 chain contains 150 repeating units. Its molar mass is about:
- 33,900 g/mol
- 39,300 g/mol
- 17,400 g/mol
- 16,950 g/mol
Show answer
Answer: A. Repeating unit = 226 g/mol. 150 × 226 = 33,900 g/mol.
-
8. Mass of water released in making 960 g of terylene is about:
- 90 g
- 120 g
- 180 g
- 360 g
Show answer
Answer: C. Moles of repeat units = 960 ÷ 192 = 5. Water = 2 × 5 × 18 = 180 g.
-
9. Glyptal differs from terylene in that its acid monomer is:
- Adipic acid
- Terephthalic acid
- Glycine
- Phthalic acid
Show answer
Answer: D. Both are polyesters of ethylene glycol; glyptal uses phthalic acid, terylene uses terephthalic acid.
-
10. A Buna-S sample has butadiene and styrene units in the mole ratio 1 : 1. Mass percentage of styrene units is about:
- 50.0%
- 65.8%
- 34.2%
- 39.1%
Show answer
Answer: B. One set = 54 + 104 = 158 g. Styrene = 104 ÷ 158 × 100 ≈ 65.8%.
-
11. Moles of double bonds in 34 g of natural rubber:
- 0.25
- 0.5
- 1.0
- 2.0
Show answer
Answer: B. Isoprene unit = 68 g/mol with one C=C. 34 ÷ 68 = 0.5 mol.
-
12. Which rubber contains chlorine?
- Buna-N
- Buna-S
- Neoprene
- Natural rubber
Show answer
Answer: C. Neoprene is polychloroprene, made from 2-chloro-1,3-butadiene.
-
13. A sample has 10 chains of 10,000 g/mol and 10 chains of 50,000 g/mol. Its PDI is about:
- 1.00
- 1.44
- 1.20
- 2.00
Show answer
Answer: B. Mn = 30,000. One of each: ΣNiMi² = 10⁸ + 25 × 10⁸ = 26 × 10⁸; ΣNiMi = 60,000; Mw = 26 × 10⁸ ÷ 6 × 10⁴ ≈ 43,333. PDI = 43,333 ÷ 30,000 ≈ 1.44.
-
14. Proteins in a pure sample usually have PDI close to 1 because:
- Their chains have the same length
- They are cross-linked
- They are biodegradable
- They are addition polymers
Show answer
Answer: A. A natural protein has a fixed sequence and length, so all molecules have the same mass: Mw = Mn and PDI = 1 (monodisperse).
-
15. Which pair of monomers gives a biodegradable polymer?
- Ethylene glycol and terephthalic acid
- Hexamethylenediamine and adipic acid
- 1,3-Butadiene and styrene
- 3-Hydroxybutanoic acid and 3-hydroxypentanoic acid
Show answer
Answer: D. These two hydroxy acids give PHBV, a biodegradable polyester. The others give terylene, nylon 6,6 and Buna-S, which are not classed as biodegradable.
Questions 1-3: lesson 1 (classification). Questions 4-6: lesson 2 (addition polymers). Questions 7-9: lesson 3 (condensation polymers). Questions 10-12: lesson 4 (rubbers and copolymers). Questions 13-15: lesson 5 (molar mass averages and biodegradable polymers). Revisit the lesson for any group where you missed a question or guessed.
Sign in to keep track of the lessons you finish.