• Practice
  • About 14 min
  • 5 practice questions

Reading a repeating unit: from polymer to monomer and back

Work out the monomers of any addition or condensation polymer from its repeating unit, and predict the repeating unit from the monomers, using two quick rules.

If something looks wrong, please tell us.

A very common polymer question shows a piece of a chain and asks, 'Which monomer or monomers made this?' Students who try to remember every polymer by name lose time; students who read the chain take ten seconds. The method rests on one observation: the backbone of the chain records how the polymer was made. This lesson gives you two rules, one for addition polymers and one for condensation polymers, and practises them on both directions of the question.

Rule 1: an all-carbon backbone means addition

In an addition polymer the monomers joined by opening a C=C double bond, so the backbone is a continuous chain of carbon atoms. To find the monomer, take the smallest repeating piece of the backbone, which for a simple alkene is two carbon atoms, and put the double bond back between them. The groups hanging off those two carbons stay where they are. So –(CH2–CHCl)n– comes from CH2=CHCl, vinyl chloride, and –(CF2–CF2)n– comes from CF2=CF2, tetrafluoroethene. A unit with a methyl group and a second group on one carbon, such as –[CH2–C(CH3)2]–, comes from CH2=C(CH3)2, which is 2-methylpropene.

Going the other way, write the monomer and open the double bond: CH2=CHCN becomes –(CH2–CHCN)n–. A chain of n monomers of a simple alkene has 2n carbon atoms in its backbone, whatever groups are attached. Dienes behave differently: isoprene or butadiene joins through four carbon atoms and leaves one C=C in each unit, as in natural rubber and Buna-S.

Rule 2: an amide or ester link means condensation

If the chain contains –CO–NH– (amide) or –CO–O– (ester) links, it is a condensation polymer. To find the monomers, cut each such link and add back the water that was lost: put –OH on the carbonyl half and –H on the other half. A cut amide link gives a carboxylic acid and an amine; a cut ester link gives a carboxylic acid and an alcohol. Counting the carbon atoms in each piece then tells you the monomer, and the nylon number if the polymer is a nylon.

Reading a repeating unit
What you see in the chainTypeWhere to cut or what to doPieces you get
Only C–C bonds in the backboneAdditionClose up two carbons, restore C=COne alkene (or diene) monomer
–CO–NH– linksCondensation (polyamide)Cut each link, add H2ODiamine + dicarboxylic acid
–CO–O– linksCondensation (polyester)Cut each link, add H2ODiol + dicarboxylic acid
–CH2– bridges joining ringsCondensation (resin)Remove the bridge, restore H on the ringPhenol + methanal

Worked example 1: a polyamide

Find the monomers of –[NH(CH2)6NH–CO(CH2)4–CO]n–. The chain contains amide links, so cut each –CO–NH– link and add water. The piece between two links on the nitrogen side is H2N–(CH2)6–NH2, hexamethylenediamine, with six carbon atoms. The piece on the carbonyl side is HOOC–(CH2)4–COOH, adipic acid, with 2 + 4 = 6 carbon atoms. Six carbons in the diamine and six in the acid give the name nylon 6,6. Check by mass: 116 + 146 − 2 × 18 = 226 g/mol, the mass of the repeating unit.

Worked example 2: a polyester

Find the monomers of –[O–CH2–CH2–O–CO–C6H4–CO]n–. The chain contains ester links, so cut each –CO–O– link and add water. The two oxygen-bearing ends with the CH2CH2 between them give HO–CH2–CH2–OH, ethylene glycol (62 g/mol). The ring piece with a carbonyl at each end gives HOOC–C6H4–COOH, terephthalic acid (166 g/mol). The polymer is terylene. The repeating unit mass is 62 + 166 − 36 = 192 g/mol.

Worked example 3: counting atoms in a chain

A chain of polypropene is made from 300 propene molecules. How many carbon atoms are in its backbone? Each propene, CH2=CH–CH3, gives a two-carbon backbone segment and a methyl side group. Backbone carbon atoms = 2 × 300 = 600. The total number of carbon atoms in the chain is 3 × 300 = 900, so a question that says 'in the backbone' wants 600 and one that says 'in the chain' wants 900.

All-carbon backbone: close up two carbons and restore the double bond. Amide or ester links: cut every link and add water back to each half.

Key takeaways

  • Read the backbone first: it tells you the type of polymer before you recall any name.
  • For addition polymers the monomer is the repeating unit with a C=C restored; a simple alkene contributes two backbone carbons.
  • For condensation polymers cut each amide or ester link and add H2O; count carbons to get the nylon number or the acid.
  • Always read whether a question asks about the backbone or the whole chain.

Check your understanding

  1. 1. The monomer of the polymer –(CH2–CHCl)n– is:

    1. Ethene (ethylene)
    2. Vinyl chloride (chloroethene)
    3. Chloroprene (2-chloro-1,3-butadiene)
    4. Tetrafluoroethene (TFE)
    Show answer

    Answer: B. The backbone is all carbon, so the polymer is an addition polymer. Close the two-carbon unit and restore the double bond: CH2=CHCl, vinyl chloride. Chloroprene would leave a C=C in each unit.

  2. 2. Cutting the ester links of –[O(CH2)2O–CO(CH2)4–CO]n– gives ethane-1,2-diol and an acid with how many carbon atoms in the acid chain, including both carboxyl carbons?

    1. 4, butanedioic (succinic) acid
    2. 5, pentanedioic (glutaric) acid
    3. 6, hexanedioic (adipic) acid
    4. 8, octanedioic (suberic) acid
    Show answer

    Answer: C. The acid piece is –CO(CH2)4CO–, which has 1 + 4 + 1 = 6 carbon atoms, so after adding water back it is HOOC(CH2)4COOH, hexanedioic (adipic) acid.

  3. 3. Which monomer gives an addition polymer with repeating unit –[CH2–C(CH3)2]–?

    1. Propene, CH2=CH–CH3
    2. But-1-ene, CH2=CH–C2H5
    3. 2-Methylpropene, (CH3)2C=CH2
    4. But-2-ene, CH3–CH=CH–CH3
    Show answer

    Answer: C. Restore the double bond between the two backbone carbons: CH2=C(CH3)2, which is 2-methylpropene. Propene would give –[CH2–CH(CH3)]–.

  4. 4. A polypropene chain is made from 300 propene molecules. How many carbon atoms lie in its backbone?

    1. 300
    2. 900
    3. 1200
    4. 600
    Show answer

    Answer: D. Each propene contributes two carbon atoms to the backbone and one to a methyl side group. Backbone carbons = 2 × 300 = 600; the whole chain has 900 carbons.

  5. 5. When an amide link of a polyamide is cut to recover the monomers, each half receives:

    1. –OH on the carbonyl side and –H on the nitrogen side
    2. –H on the carbonyl side and –OH on the nitrogen side
    3. –OH on both halves
    4. –H on both halves
    Show answer

    Answer: A. The link formed by losing water (OH from the acid, H from the amine), so reversing it restores –OH to the carbonyl carbon (giving –COOH) and –H to the nitrogen (giving –NH2).

Privacy · Terms · Refunds · Delivery