• Practice
  • About 16 min
  • 5 practice questions

Solar calculations: area, output and real-world losses

Size a solar system from a power target, estimate daily energy with peak sun hours and a performance ratio, and account for the drop in output when panels get hot.

If something looks wrong, please tell us.

Solar questions in practice tests usually ask one of three things: how much power a given area produces, how much area is needed for a target power, or how much energy a system gives in a day. Each is a short chain of multiplications or divisions. The skill is in setting up the chain correctly and remembering the losses that make real systems produce less than the label promises.

The basic chain

Power from a panel equals irradiance (sunlight per square metre) times area times efficiency. Energy equals power times time. Rearranging the first equation gives the area needed for a target power: area = power ÷ (irradiance × efficiency). Standard test conditions assume 1,000 W/m², so a quick shortcut is that each square metre of a panel with efficiency e gives 1,000 × e watts.

Area needed = Target power ÷ (1,000 W/m² × efficiency). Daily energy ≈ Rated power × Peak sun hours × Performance ratio.

Peak sun hours

Sunlight is weak in the morning, strongest at noon, and weak again in the evening. Instead of handling that curve, we use peak sun hours: the number of hours of full 1,000 W/m² sunshine that would deliver the same total energy as the whole day. A location with 5 peak sun hours receives 5 kWh of sunlight per square metre per day. This turns a complicated day into a single multiplication.

Losses and the performance ratio

Real systems lose energy in several places: dust on the panels, resistance in wires, the inverter, and above all heat. Silicon cells become less efficient as they get hotter, which is why output on a very hot day can be lower than on a cool, bright one. A performance ratio sums up all these losses as one fraction, such as 0.8, meaning the system delivers 80% of the ideal energy. A common trap is to assume that more heat means more electricity; for PV the opposite is true.

Worked example 1: area for a target

A school wants 3 kW of panels using modules that are 20% efficient. Area = 3,000 ÷ (1,000 × 0.20) = 3,000 ÷ 200 = 15 m². Speed method: a 20% panel gives 200 W per square metre, so 3,000 ÷ 200 = 15 m² directly. With 15% panels, each square metre gives 150 W and the area becomes 3,000 ÷ 150 = 20 m², so lower efficiency means more roof space.

Worked example 2: daily energy with losses

A 3 kW system is installed where there are 4.5 peak sun hours, and the performance ratio is 0.8. Ideal energy = 3 × 4.5 = 13.5 kWh. Actual = 13.5 × 0.8 = 10.8 kWh per day. Over a 30-day month that is 10.8 × 30 = 324 kWh. If the question omits the performance ratio, use 13.5 kWh; read carefully to see which is asked.

Worked example 3: a hot day

Suppose a panel's output falls by 0.4% for every degree Celsius its cells rise above 25 °C (an illustrative coefficient). The panel is rated 320 W at 25 °C. On a summer afternoon the cells reach 55 °C, which is 30 degrees above 25. Loss = 30 × 0.4% = 12%. Output = 320 × (1 − 0.12) = 320 × 0.88 = 281.6 W. This is why panels are mounted with an air gap behind them to keep them cooler.

Solar thermal versus PV in questions

Remember the distinction when a question describes a system. A device that heats water or air for direct use is solar thermal, even if it sits on a roof next to PV panels. A plant that uses mirrors to concentrate sunlight and drive a turbine is concentrated solar power, a thermal technology, and it can store heat in molten salt. Only PV turns light directly into electricity, and only PV needs an inverter to supply AC.

Key takeaways

Power = irradiance × area × efficiency; area = power ÷ (irradiance × efficiency). Use peak sun hours to turn a day of changing sunlight into one number, and a performance ratio to include losses. PV output falls as cells get hotter. Distinguish PV, which makes electricity directly, from solar thermal and concentrated solar power, which use heat.

Check your understanding

  1. 1. How much panel area is needed for 4 kW using 16% efficient modules under 1,000 W/m²?

    1. 16 m²
    2. 40 m²
    3. 25 m²
    4. 6.4 m²
    Show answer

    Answer: C. Each square metre gives 1,000 × 0.16 = 160 W. Area = 4,000 ÷ 160 = 25 m².

  2. 2. A 5 kW system with 4 peak sun hours and a performance ratio of 0.75 produces how much energy per day?

    1. 20 kWh
    2. 5.3 kWh
    3. 15 kWh
    4. 26.7 kWh
    Show answer

    Answer: C. Ideal = 5 × 4 = 20 kWh. Actual = 20 × 0.75 = 15 kWh.

  3. 3. What happens to the output of a silicon PV panel as its cells get hotter, with the same sunlight?

    1. It falls
    2. It rises
    3. It stays exactly the same
    4. It doubles for every 10 °C
    Show answer

    Answer: A. Silicon cells lose efficiency as temperature rises, so output falls on hot days for the same sunlight.

  4. 4. A 300 W panel loses 0.5% of output per °C above 25 °C. What does it produce at a cell temperature of 45 °C?

    1. 285 W
    2. 270 W
    3. 330 W
    4. 150 W
    Show answer

    Answer: B. 45 − 25 = 20 °C. Loss = 20 × 0.5% = 10%. Output = 300 × 0.9 = 270 W.

  5. 5. A location receives 6 kWh of sunlight per square metre on a day. How many peak sun hours is that?

    1. 1
    2. 24
    3. 6
    4. 0.6
    Show answer

    Answer: C. Peak sun hours are hours of 1,000 W/m², that is 1 kWh/m² per hour. 6 kWh/m² ÷ 1 kWh/m² per hour = 6 hours.

Privacy · Terms · Refunds · Delivery