• Practice
  • About 15 min
  • 5 practice questions

Bulk modulus, shear modulus and Poisson's ratio: problem types

Solve the standard problem types on volume strain, depth in water, shear force and displacement, and sideways contraction of a stretched wire.

If something looks wrong, please tell us.

After Young's modulus, the next three exam favourites are the bulk modulus, the shear modulus and Poisson's ratio. Each has a short formula, and the questions repeat a handful of patterns. This lesson sets out the patterns, with working, and lists the traps. All numerical values are illustrative, not tabulated data.

Formulas to know

  • Bulk modulus: K = ΔP ÷ (ΔV ÷ V) in magnitude. So the fractional change in volume is ΔV ÷ V = ΔP ÷ K, and ΔV = (ΔP ÷ K) × V.
  • Shear modulus: G = (F ÷ A) ÷ θ, with θ = x ÷ h for a block whose top face moves sideways by x.
  • Poisson's ratio: σ = lateral strain ÷ longitudinal strain (magnitudes).
  • Relations: Y = 3K(1 − 2σ) and Y = 2G(1 + σ). Also, for a stretched wire, the fractional change in volume is ε(1 − 2σ), where ε is the longitudinal strain.

Worked examples

Type 1: volume change from pressure. A liquid has K = 2 × 10⁹ Pa. Its pressure is raised by 3 × 10⁷ Pa. Fractional decrease = 3 × 10⁷ ÷ 2 × 10⁹ = 0.015. If its volume was 400 cm³, ΔV = 0.015 × 400 = 6 cm³.

Type 2: pressure for a given compression. What pressure increase compresses the same liquid by 0.5%? ΔP = K × (ΔV ÷ V) = 2 × 10⁹ × 0.005 = 10⁷ Pa.

Type 3: object deep in water. A solid sphere with K = 10¹¹ Pa is lowered to a depth of 1000 m in water of density 1000 kg/m³. The extra pressure is hρg = 1000 × 1000 × 10 = 10⁷ Pa. ΔV ÷ V = 10⁷ ÷ 10¹¹ = 10⁻⁴. Since V is proportional to R³, the fractional change in radius is one-third of this: 10⁻⁴ ÷ 3 ≈ 3.3 × 10⁻⁵. The solid hardly changes in size.

Type 4: shear force and displacement. A force of 10⁴ N acts along the top face, of area 0.05 m², of a block 0.2 m high. G = 2 × 10¹⁰ Pa. Shear stress = 10⁴ ÷ 0.05 = 2 × 10⁵ Pa. Shear strain θ = 2 × 10⁵ ÷ 2 × 10¹⁰ = 10⁻⁵ radian. The top face moves x = θh = 10⁻⁵ × 0.2 = 2 × 10⁻⁶ m.

Type 5: Poisson's ratio. A wire of diameter 2 mm is stretched so that its longitudinal strain is 10⁻³. Poisson's ratio is 0.3. Lateral strain = 0.3 × 10⁻³ = 3 × 10⁻⁴. The diameter shrinks by 2 × 10⁻³ × 3 × 10⁻⁴ = 6 × 10⁻⁷ m, which is 0.6 micrometre. The fractional volume change = 10⁻³ × (1 − 0.6) = 4 × 10⁻⁴, an increase.

Type 6: relating the moduli. For Y = 2 × 10¹¹ Pa and σ = 0.3: K = Y ÷ [3(1 − 2σ)] = 2 × 10¹¹ ÷ (3 × 0.4) ≈ 1.67 × 10¹¹ Pa and G = Y ÷ [2(1 + σ)] = 2 × 10¹¹ ÷ 2.6 ≈ 7.7 × 10¹⁰ Pa.

ΔV ÷ V = ΔP ÷ K. Shear: θ = x ÷ h and G = (F ÷ A) ÷ θ. Radius changes by one-third of the fractional volume change.

— Rule to remember

Traps

  • Treating ΔV as the answer when the formula gives the fractional change ΔV ÷ V. Multiply by V.
  • Forgetting to convert depth to pressure with hρg.
  • Using the area of the whole block instead of the face the force acts on.
  • Taking the shear angle in degrees. Use radian.

Key takeaways

  • Bulk: find the fractional change first, then multiply by the volume.
  • Shear: stress, then strain as an angle, then displacement x = θh.
  • Poisson: lateral strain is σ times longitudinal strain.

Check your understanding

  1. 1. A liquid with K = 5 × 10⁹ Pa is compressed by a pressure increase of 10⁷ Pa. Its fractional decrease in volume is:

    1. 2 × 10⁻³
    2. 5 × 10⁻³
    3. 2 × 10⁻²
    4. 5 × 10⁻²
    Show answer

    Answer: A. ΔV ÷ V = 10⁷ ÷ (5 × 10⁹) = 2 × 10⁻³.

  2. 2. A liquid of volume 200 cm³ has K = 2 × 10⁹ Pa. A pressure increase of 2 × 10⁷ Pa changes its volume by:

    1. 0.5 cm³
    2. 4 cm³
    3. 2 cm³
    4. 1 cm³
    Show answer

    Answer: C. ΔV ÷ V = 2 × 10⁷ ÷ 2 × 10⁹ = 0.01, so ΔV = 0.01 × 200 = 2 cm³ (a decrease).

  3. 3. The top face of a block of height 0.1 m is moved sideways by 0.01 mm by a tangential force. The shear angle is:

    1. 10⁻² radian
    2. 10⁻³ radian
    3. 10⁻⁵ radian
    4. 10⁻⁴ radian
    Show answer

    Answer: D. θ = x ÷ h = 10⁻⁵ ÷ 0.1 = 10⁻⁴ radian.

  4. 4. A wire has a longitudinal strain of 2 × 10⁻³ and Poisson's ratio 0.25. The lateral strain (in magnitude) is:

    1. 8 × 10⁻³
    2. 5 × 10⁻⁴
    3. 2.5 × 10⁻⁴
    4. 5 × 10⁻³
    Show answer

    Answer: B. Lateral strain = σ × longitudinal strain = 0.25 × 2 × 10⁻³ = 5 × 10⁻⁴.

  5. 5. A solid of bulk modulus 10¹¹ Pa is under an extra pressure of 3 × 10⁷ Pa. The fractional change in its radius is:

    1. 10⁻⁴
    2. 3 × 10⁻⁴
    3. 10⁻³
    4. 10⁻⁵
    Show answer

    Answer: A. ΔV ÷ V = 3 × 10⁷ ÷ 10¹¹ = 3 × 10⁻⁴. Since V is proportional to R³, the radius changes by one-third of this: 10⁻⁴.

Privacy · Terms · Refunds · Delivery