• Practice
  • About 15 min
  • 5 practice questions

Wires and springs: ratio shortcuts, cutting springs and load sharing

Compare wires with the L ÷ r² shortcut, find the effect of cutting a spring, and solve series, parallel and load-sharing problems.

If something looks wrong, please tell us.

Many questions on elasticity do not ask for a number at all. They give two wires or two springs and ask for a ratio. The fastest way is to write down how the answer depends on each quantity and then substitute the ratios. That is the method used here. The numbers are illustrative.

Shortcuts

  • Wire extension: ΔL = FL ÷ (πr²Y). So ΔL ∝ F × L ÷ (r² × Y). For the same material and load, ΔL ∝ L ÷ r².
  • Spring constant of a piece of spring: a spring is stiffer when shorter. A piece that is a fraction f of the original length has constant k ÷ f. Cutting into n equal parts makes each part nk.
  • Series springs: 1/k = 1/k₁ + 1/k₂ (extensions add, same force). Parallel springs: k = k₁ + k₂ (same extension, forces add).
  • Two wires supporting one rigid bar (equal lengths and areas): they stretch equally, so loads share in the ratio of their Young's moduli.

Worked examples

Example 1: wire ratio. Wire A has length 1.5 m and radius 0.5 mm. Wire B is of the same material, with length 3 m and radius 1.5 mm. Both carry the same load. ΔL_B ÷ ΔL_A = (3 ÷ 1.5) ÷ (1.5 ÷ 0.5)² = 2 ÷ 9. So B stretches only 2/9 as much as A.

Example 2: cutting a spring. A spring has constant 120 N/m. Cut into three equal pieces, each has a constant 3 × 120 = 360 N/m. Cut instead into pieces of one-third and two-thirds of the length: the short piece has 120 ÷ (1/3) = 360 N/m, and the long piece has 120 ÷ (2/3) = 180 N/m. Check: these two pieces in series give 1/360 + 1/180 = 3/360 = 1/120, which restores the original spring.

Example 3: series and parallel. A 2 kg block (weight 20 N) hangs from two springs of 200 N/m and 300 N/m. In series, k = 1 ÷ (1/200 + 1/300) = 120 N/m, so the extension = 20 ÷ 120 = 0.167 m. In parallel, k = 500 N/m and the extension = 20 ÷ 500 = 0.04 m. The series arrangement stretches 4.2 times as much.

Example 4: load sharing. A horizontal rigid bar hangs from a steel wire (Y = 2 × 10¹¹ Pa) and a brass-like wire (Y = 10¹¹ Pa), both of equal length and area. The bar stays level, so the extensions are equal and the loads share as 2 : 1. A load of 300 N is then carried as 200 N by the steel and 100 N by the other wire.

Example 5: breaking mass with safety. A wire of diameter 0.8 mm has a breaking stress of 5 × 10⁸ Pa. A = π × (0.4 × 10⁻³)² = 5.03 × 10⁻⁷ m². Breaking force = 5 × 10⁸ × 5.03 × 10⁻⁷ = 251 N, so the breaking mass = 25.1 kg (g = 10 m/s²). With a safety factor of 5 the safe load is 251 ÷ 5 = 50.3 N, which is a mass of about 5 kg.

Wire: ΔL ∝ L ÷ (r²Y). Spring piece of fraction f: k ÷ f. Series: reciprocals add. Parallel: constants add.

— Rule to remember

Traps

  • Using the ratio of diameters but forgetting to square it (or squaring the ratio of lengths).
  • Adding spring constants for a series pair.
  • Using the weight in kg. Multiply by g to get the force.

Key takeaways

  • Write the dependence first, then put in the ratios.
  • Shorter spring means stiffer spring.
  • Equal extension means load is shared in proportion to stiffness.

Check your understanding

  1. 1. Two wires of the same material have lengths in the ratio 2 : 1 and radii in the ratio 2 : 1. Under the same load, their extensions are in the ratio:

    1. 1 : 1
    2. 1 : 2
    3. 1 : 4
    4. 2 : 1
    Show answer

    Answer: B. ΔL ∝ L ÷ r² gives (2 ÷ 4) : (1 ÷ 1) = 0.5 : 1 = 1 : 2.

  2. 2. A spring of constant 80 N/m is cut into four equal pieces. The constant of each piece is:

    1. 20 N/m
    2. 40 N/m
    3. 160 N/m
    4. 320 N/m
    Show answer

    Answer: D. Each piece is one-quarter of the length, so it is four times as stiff: 4 × 80 = 320 N/m.

  3. 3. Springs of 100 N/m and 100 N/m are joined in parallel. The effective constant is:

    1. 50 N/m
    2. 100 N/m
    3. 200 N/m
    4. 400 N/m
    Show answer

    Answer: C. In parallel the constants add: 100 + 100 = 200 N/m.

  4. 4. Two springs of 60 N/m and 60 N/m are in series. A weight of 15 N hangs from them. The total extension is:

    1. 0.25 m
    2. 0.5 m
    3. 0.125 m
    4. 1 m
    Show answer

    Answer: B. Series: k = 30 N/m. Extension = 15 ÷ 30 = 0.5 m.

  5. 5. A wire has a breaking stress of 4 × 10⁸ Pa and cross-section 2.5 × 10⁻⁷ m². The breaking force is:

    1. 100 N
    2. 160 N
    3. 10 N
    4. 1000 N
    Show answer

    Answer: A. F = stress × area = 4 × 10⁸ × 2.5 × 10⁻⁷ = 100 N.

Privacy · Terms · Refunds · Delivery