- Practice
- About 15 min
- 5 practice questions
Stress, strain and Hooke's law
Define stress, strain and Young's modulus and use them to find the extension of a wire.
If something looks wrong, please tell us.
When you pull on a wire or press on a rod, it deforms and then tries to return to its shape. Elasticity is described by stress and strain, and Hooke's law connects them. Numerical questions on extension of wires appear again and again.
Definitions
- Stress = restoring force per unit area = F/A (unit pascal, Pa = N/m²; dimensions [M L⁻¹ T⁻²]).
- Strain = fractional change in size: longitudinal strain = ΔL/L (no unit).
- Hooke's law: within the elastic limit, stress is proportional to strain.
- Young's modulus Y = stress / strain = (F/A)/(ΔL/L) = FL/(AΔL).
- Bulk modulus K = −ΔP/(ΔV/V); shear (rigidity) modulus η = shear stress/shear strain.
From Y = FL/(AΔL), the extension is ΔL = FL/(AY). It is proportional to the force and the length, and inversely proportional to the area (that is, to the square of the radius for a round wire).
Worked examples
Example 1. A steel wire 2 m long with cross-section 1 mm² (= 10⁻⁶ m²) carries a load giving a force of 100 N. Y = 2 × 10¹¹ Pa. ΔL = FL/(AY) = 100 × 2/(10⁻⁶ × 2 × 10¹¹) = 200/(2 × 10⁵) = 10⁻³ m = 1 mm.
Example 2. Two wires of the same material and load have lengths in the ratio 1 : 2 and radii in the ratio 1 : 2. ΔL is proportional to L/r². The ratio is (1/1) : (2/4) = 1 : 0.5 = 2 : 1.
Example 3. A wire is stretched by 0.2 cm when its length is 2 m. Strain = 0.002/2 = 10⁻³. With Y = 2 × 10¹¹ Pa, stress = Y × strain = 2 × 10⁸ Pa.
Example 4. What load can a wire of area 2 × 10⁻⁶ m² bear if the stress must not exceed 3 × 10⁸ Pa? F = stress × A = 3 × 10⁸ × 2 × 10⁻⁶ = 600 N.
Y = FL/(AΔL). Stress is proportional to strain only below the elastic limit. Young's modulus depends on the material, not on the size of the wire.
Key takeaways
- Stress is force per area; strain is fractional change and has no unit.
- Extension is proportional to force and length, inversely proportional to area.
- Always convert mm² to m² before substituting.
Check your understanding
-
1. A steel wire 2 m long with cross-sectional area 10⁻⁶ m² is pulled by a force of 100 N. Taking Y = 2 × 10¹¹ Pa, what is its extension?
- 0.1 mm
- 1 mm
- 10 mm
- 2 mm
Show answer
Answer: B. ΔL = FL ÷ (AY) = (100 × 2) ÷ (10⁻⁶ × 2 × 10¹¹) = 200 ÷ (2 × 10⁵) = 10⁻³ m = 1 mm.
-
2. What is the SI unit of Young's modulus?
- N/m
- N
- It has no unit
- N/m² (pascal)
Show answer
Answer: D. Y = stress ÷ strain. Strain has no unit, so Y has the unit of stress: N/m², the pascal.
-
3. A force F stretches a wire by x. The same force acts on a wire of the same material and length but double the radius. What is the new extension?
- x/4
- x/2
- 2x
- 4x
Show answer
Answer: A. ΔL = FL ÷ (AY), and A = πr². Doubling r makes A four times larger, so the extension becomes x/4.
-
4. A rod 1 m long with area 2 × 10⁻⁴ m² has Y = 10¹¹ Pa. What force extends it by 0.1 mm?
- 200 N
- 20 000 N
- 2000 N
- 2 × 10⁶ N
Show answer
Answer: C. F = YAΔL ÷ L = 10¹¹ × 2 × 10⁻⁴ × 10⁻⁴ ÷ 1 = 2 × 10³ N = 2000 N (0.1 mm = 10⁻⁴ m).
-
5. The stress in a wire of area 2 × 10⁻⁶ m² must not exceed 3 × 10⁸ Pa. What is the largest load it may carry?
- 60 N
- 6000 N
- 600 N
- 150 N
Show answer
Answer: C. F = stress × A = 3 × 10⁸ × 2 × 10⁻⁶ = 6 × 10² = 600 N.
Sign in to keep track of the lessons you finish.