• Practice
  • About 14 min
  • 5 practice questions

Elastic behaviour and energy stored in a wire

Read a stress-strain curve and calculate the elastic energy stored in a stretched wire.

If something looks wrong, please tell us.

Real materials do not obey Hooke's law forever. A stress-strain curve shows where a material stays elastic, where it flows, and where it breaks. Stretching also stores energy, which comes back when the wire is released.

The stress-strain curve

  • Proportional limit: up to here stress is proportional to strain (a straight line).
  • Elastic limit: the largest stress from which the body still returns to its original size when released.
  • Yield point: beyond it the material deforms permanently (plastic behaviour).
  • Ultimate tensile strength: the maximum stress on the curve.
  • Fracture (breaking) point: the wire snaps.
  • Ductile materials (copper) show a long plastic region; brittle materials (glass) break soon after the elastic limit.

Elastic potential energy

The work done in stretching a wire by ΔL is stored as elastic energy: U = ½ F ΔL. Per unit volume, u = ½ × stress × strain = ½ Y (strain)². For a spring, U = ½kx².

Worked examples

Example 1. The wire in the earlier example (F = 100 N, ΔL = 1 mm) stores U = ½ × 100 × 10⁻³ = 0.05 J.

Example 2. The wire has volume 2 × 10⁻⁶ m³ (area 10⁻⁶ m², length 2 m). Energy density = U/V = 0.05/(2 × 10⁻⁶) = 2.5 × 10⁴ J/m³. Check: ½ × stress × strain = ½ × 10⁸ × 5 × 10⁻⁴ = 2.5 × 10⁴ J/m³ (stress = 100/10⁻⁶ = 10⁸ Pa; strain = 10⁻³/2 = 5 × 10⁻⁴).

Example 3. A spring of constant 400 N/m is stretched by 5 cm. U = ½ × 400 × 0.05² = 0.5 J.

Example 4. A wire is extended by x. Elastic energy is proportional to x² for a given wire. Doubling the extension makes the stored energy 4 times as large.

Elastic energy U = ½ F ΔL = ½ kx². Energy per unit volume = ½ × stress × strain. Beyond the elastic limit deformation is permanent.

— Remember

Key takeaways

  • Past the elastic limit the body does not return to its original size.
  • Stored energy is the area under the force-extension graph, ½ F ΔL.
  • Energy per volume equals ½ × stress × strain.

Check your understanding

  1. 1. A force of 50 N stretches a wire by 2 mm. How much elastic energy is stored?

    1. 0.05 J
    2. 0.1 J
    3. 100 J
    4. 0.025 J
    Show answer

    Answer: A. U = ½ F ΔL = ½ × 50 × 0.002 = 0.05 J. Forgetting the ½ gives 0.1 J; forgetting to convert 2 mm to 0.002 m gives a far too large answer.

  2. 2. What is the elastic limit of a material?

    1. The maximum stress on the stress-strain curve
    2. The force needed to double its length
    3. The stress at which it breaks
    4. The largest stress from which it still returns to its original size when released
    Show answer

    Answer: D. Up to the elastic limit the body regains its original size. The maximum stress on the curve is the ultimate tensile strength, and the snapping point is the fracture point.

  3. 3. A spring of spring constant 400 N/m is stretched by 5 cm. How much energy does it store?

    1. 1 J
    2. 0.5 J
    3. 10 J
    4. 5000 J
    Show answer

    Answer: B. x = 0.05 m. U = ½kx² = ½ × 400 × 0.05² = 200 × 0.0025 = 0.5 J.

  4. 4. The stretch of a spring is doubled (within the elastic limit). How does the stored energy change?

    1. It becomes 4 times as large
    2. It doubles
    3. It stays the same
    4. It halves
    Show answer

    Answer: A. U = ½kx² is proportional to x², so doubling x multiplies U by 2² = 4.

  5. 5. Which material is brittle, breaking soon after its elastic limit?

    1. Copper
    2. Gold
    3. Glass
    4. Steel
    Show answer

    Answer: C. Brittle materials such as glass break soon after the elastic limit. Copper, gold and steel are ductile and show a long plastic region.

Sign in to keep track of the lessons you finish.

Next lesson → Surface tension and excess pressure

Privacy · Terms · Refunds · Delivery