• Practice
  • About 16 min
  • 5 practice questions

Surface tension and excess pressure

Use surface tension to find the force on a wire frame, the excess pressure in drops and bubbles, and the work in enlarging a surface.

If something looks wrong, please tell us.

The surface of a liquid behaves like a stretched elastic skin. This explains why small drops are round, why insects walk on water and why a soap bubble needs extra pressure inside. The key quantity is surface tension.

Surface tension

Surface tension T is the force per unit length acting along a line drawn on the surface: T = F/l (unit N/m). It is also the surface energy per unit area: T = W/ΔA (unit J/m²). It decreases when temperature rises and when soap or detergent is added.

Excess pressure

  • Liquid drop (one surface): ΔP = 2T/r.
  • Soap bubble in air (two surfaces): ΔP = 4T/r.
  • Air bubble inside a liquid (one surface): ΔP = 2T/r.
  • Work done in blowing a soap bubble of radius r: W = T × (increase in area) = T × 2 × 4πr² (two surfaces).

Worked examples

Example 1. A soap film is on a wire frame with a sliding wire of length 0.1 m, and T = 0.07 N/m. The film has two surfaces, so the force pulling the wire is F = 2Tl = 2 × 0.07 × 0.1 = 0.014 N.

Example 2. A water drop has a radius of 1 mm and T = 0.07 N/m. ΔP = 2T/r = 0.14/10⁻³ = 140 Pa.

Example 3. A soap bubble of radius 2 cm with T = 0.03 N/m has ΔP = 4 × 0.03/0.02 = 6 Pa.

Example 4. Work to blow a soap bubble from radius 0 to 1 cm (T = 0.03 N/m): area gained = 2 × 4π × (0.01)² = 8π × 10⁻⁴ m² ≈ 2.51 × 10⁻³ m². W = 0.03 × 2.51 × 10⁻³ ≈ 7.5 × 10⁻⁵ J.

Drop: ΔP = 2T/r. Soap bubble: ΔP = 4T/r. Smaller bubbles have higher internal pressure. A soap film has two surfaces.

— Remember

Key takeaways

  • Surface tension is force per length, and equals surface energy per area.
  • Count the number of surfaces: drop has one, soap bubble has two.
  • Excess pressure is greater in smaller drops and bubbles.

Check your understanding

  1. 1. What is the excess pressure inside a soap bubble of radius r in air, with surface tension T?

    1. T/r
    2. 4T/r
    3. 2T/r
    4. 8T/r
    Show answer

    Answer: B. A soap bubble in air has two surfaces (inside and outside), so ΔP = 2 × 2T/r = 4T/r.

  2. 2. A water drop has a radius of 1 mm and surface tension 0.07 N/m. What is the excess pressure inside it?

    1. 70 Pa
    2. 280 Pa
    3. 0.14 Pa
    4. 140 Pa
    Show answer

    Answer: D. A drop has one surface: ΔP = 2T/r = 2 × 0.07 ÷ 10⁻³ = 0.14 ÷ 0.001 = 140 Pa.

  3. 3. A soap bubble of radius 2 cm has surface tension 0.03 N/m. What is the excess pressure inside it?

    1. 3 Pa
    2. 0.06 Pa
    3. 12 Pa
    4. 6 Pa
    Show answer

    Answer: D. Two surfaces: ΔP = 4T/r = 4 × 0.03 ÷ 0.02 = 0.12 ÷ 0.02 = 6 Pa. Using 2T/r would give 3 Pa.

  4. 4. Two soap bubbles of radii 1 cm and 2 cm are joined by a tube. Which way does the air flow?

    1. From the larger bubble to the smaller one
    2. From the smaller bubble to the larger one
    3. No air flows, since both are soap bubbles
    4. Air flows both ways until both are the same size
    Show answer

    Answer: B. Excess pressure 4T/r is greater in the smaller bubble, so air is pushed from the smaller bubble into the larger one.

  5. 5. A soap film is held on a wire frame with a sliding wire 0.1 m long. If T = 0.07 N/m, what force does the film exert on the sliding wire?

    1. 0.007 N
    2. 0.0035 N
    3. 0.014 N
    4. 0.14 N
    Show answer

    Answer: C. A film has two surfaces, so F = 2Tl = 2 × 0.07 × 0.1 = 0.014 N. Counting one surface gives 0.007 N.

Sign in to keep track of the lessons you finish.

Next lesson → Capillarity and angle of contact

Privacy · Terms · Refunds · Delivery