• Practice
  • 15 practice questions

Final self-assessment: elasticity, surface tension and viscosity

Test yourself on the whole course: 15 questions with answers explained.

If something looks wrong, please tell us.

Attempt all 15 questions before you check any answer. They are a little harder than the checks after each lesson. Which lesson each question comes from - questions 1-3: lesson 1, "Stress, strain and Hooke's law"; questions 4-6: lesson 2, "Elastic behaviour and energy stored in a wire"; questions 7-9: lesson 3, "Surface tension and excess pressure"; questions 10-12: lesson 4, "Capillarity and angle of contact"; questions 13-15: lesson 5, "Viscosity and terminal velocity". Revisit that lesson for any question you missed.

Final self-assessment

  1. 1. Two wires of the same material carry the same load. Their lengths are in the ratio 1 : 2 and their radii in the ratio 1 : 2. What is the ratio of their extensions?

    1. 2 : 1
    2. 1 : 2
    3. 1 : 1
    4. 1 : 4
    Show answer

    Answer: A. ΔL ∝ L/r². First wire: 1/1² = 1. Second wire: 2/2² = 0.5. Ratio = 1 : 0.5 = 2 : 1.

  2. 2. The Young's modulus of a wire depends on:

    1. Its length
    2. Its cross-sectional area
    3. The load hung on it
    4. The material only
    Show answer

    Answer: D. Young's modulus is a property of the material. The extension depends on length, area and load, but the ratio stress ÷ strain does not.

  3. 3. A wire 2 m long is stretched by 0.2 cm. If Y = 2 × 10¹¹ Pa, what is the stress in it?

    1. 2 × 10⁹ Pa
    2. 2 × 10⁸ Pa
    3. 2 × 10⁷ Pa
    4. 2 × 10¹⁰ Pa
    Show answer

    Answer: B. 0.2 cm = 0.002 m. Strain = 0.002 ÷ 2 = 10⁻³. Stress = Y × strain = 2 × 10¹¹ × 10⁻³ = 2 × 10⁸ Pa.

  4. 4. A stretched wire has a stress of 10⁸ Pa and a strain of 5 × 10⁻⁴. What is the elastic energy stored per unit volume?

    1. 2.5 × 10⁴ J/m³
    2. 5 × 10⁴ J/m³
    3. 1.25 × 10⁴ J/m³
    4. 2 × 10¹¹ J/m³
    Show answer

    Answer: A. Energy per unit volume = ½ × stress × strain = ½ × 10⁸ × 5 × 10⁻⁴ = 2.5 × 10⁴ J/m³.

  5. 5. A material shows a long plastic region on its stress-strain curve before it breaks. It is:

    1. Brittle, like glass
    2. Brittle, like copper
    3. Ductile, like copper
    4. Ductile, like glass
    Show answer

    Answer: C. Ductile materials such as copper deform a lot plastically before fracture. Brittle materials such as glass break soon after the elastic limit.

  6. 6. A spring stores 2 J of energy when stretched by 4 cm. How much energy does it store when stretched by 8 cm (within the elastic limit)?

    1. 4 J
    2. 8 J
    3. 16 J
    4. 2 J
    Show answer

    Answer: B. U = ½kx² ∝ x². Doubling x from 4 cm to 8 cm multiplies U by 4: 2 × 4 = 8 J.

  7. 7. What is the excess pressure inside a mercury drop of radius 0.5 mm if its surface tension is 0.5 N/m?

    1. 1000 Pa
    2. 4000 Pa
    3. 2 Pa
    4. 2000 Pa
    Show answer

    Answer: D. A drop has one surface: ΔP = 2T/r = 2 × 0.5 ÷ (0.5 × 10⁻³) = 1 ÷ 0.0005 = 2000 Pa.

  8. 8. How much work is done in blowing a soap bubble from zero to a radius of 1 cm, if T = 0.03 N/m?

    1. About 3.8 × 10⁻⁵ J
    2. About 1.5 × 10⁻⁴ J
    3. About 0.75 J
    4. About 7.5 × 10⁻⁵ J
    Show answer

    Answer: D. The bubble has two surfaces: area gained = 2 × 4π × (0.01)² = 8π × 10⁻⁴ ≈ 2.51 × 10⁻³ m². W = 0.03 × 2.51 × 10⁻³ ≈ 7.5 × 10⁻⁵ J. Counting one surface gives half this.

  9. 9. An air bubble of radius r is inside water of surface tension T. What is the excess pressure inside the bubble?

    1. 4T/r
    2. 2T/r
    3. T/r
    4. 8T/r
    Show answer

    Answer: B. An air bubble inside a liquid has only one liquid surface, so ΔP = 2T/r. The 4T/r result is for a soap bubble in air, which has two surfaces.

  10. 10. Water (T = 0.07 N/m, ρ = 1000 kg/m³, θ = 0°) is in a capillary tube of radius 0.1 mm. Taking g = 10 m/s², how high does it rise?

    1. 1.4 cm
    2. 140 cm
    3. 14 cm
    4. 2.8 cm
    Show answer

    Answer: C. h = 2T ÷ (rρg) = 0.14 ÷ (10⁻⁴ × 1000 × 10) = 0.14 ÷ 1 = 0.14 m = 14 cm.

  11. 11. Why is mercury depressed in a glass capillary tube?

    1. Its angle of contact with glass is more than 90°, so cos θ is negative and h is negative
    2. Its angle of contact with glass is less than 90°, so it does not wet glass
    3. It is too dense for surface tension to act on it
    4. Its surface tension is zero
    Show answer

    Answer: A. For mercury on glass θ > 90°. In h = 2T cos θ ÷ (rρg), cos θ is negative, so h is negative: the level inside falls below the outside level.

  12. 12. Water rises 3 cm in a capillary tube. How high does it rise in a tube whose radius is 1.5 times as large?

    1. 4.5 cm
    2. 1.33 cm
    3. 2 cm
    4. 3 cm
    Show answer

    Answer: C. h ∝ 1/r, so the new height = 3 ÷ 1.5 = 2 cm.

  13. 13. A small sphere falls at a terminal velocity v through an oil. A sphere of the same material with three times the radius falls through the same oil. Its terminal velocity is:

    1. 3v
    2. 27v
    3. v/3
    4. 9v
    Show answer

    Answer: D. v_t ∝ r². Tripling r multiplies v_t by 3² = 9.

  14. 14. Express 2 poise in Pa s.

    1. 0.2 Pa s
    2. 20 Pa s
    3. 0.02 Pa s
    4. 200 Pa s
    Show answer

    Answer: A. 1 Pa s = 10 poise, so 1 poise = 0.1 Pa s and 2 poise = 0.2 Pa s.

  15. 15. A sphere of radius 1 mm moves slowly at 0.02 m/s through glycerine of viscosity 0.8 Pa s. What is the viscous drag on it (Stokes' law)?

    1. About 3.0 × 10⁻⁷ N
    2. About 3.0 × 10⁻⁴ N
    3. About 1.0 × 10⁻⁴ N
    4. About 3.0 × 10⁻¹ N
    Show answer

    Answer: B. F = 6πηrv = 6π × 0.8 × 10⁻³ × 0.02 ≈ 18.85 × 1.6 × 10⁻⁵ ≈ 3.0 × 10⁻⁴ N.

Privacy · Terms · Refunds · Delivery