• Practice
  • About 15 min
  • 5 practice questions

Expressing hardness: CaCO3 equivalents and units

Convert any calcium or magnesium salt into its calcium carbonate equivalent, and move quickly between ppm, mg/L, degrees French and degrees Clarke.

If something looks wrong, please tell us.

Hardness questions in competitive exams almost never ask you to name a salt; they ask you for a number. Every such number is expressed in one common currency, calcium carbonate equivalents, so that a mixture of different calcium and magnesium salts can be added up. Master this conversion and the units around it, and the rest of the practice course becomes arithmetic.

Why calcium carbonate is the standard

Hardness is caused by Ca2+ and Mg2+ ions, but they come with different partners: hydrogencarbonate, chloride, sulphate or nitrate. To add them, each salt is replaced by the mass of CaCO3 that contains the same number of hardness-causing ions. Calcium carbonate is chosen because its molar mass is a convenient 100 (equivalent weight 50) and because it is the insoluble salt that actually forms when hard water is softened.

For any salt with one Ca or Mg per formula unit, the rule is: hardness as CaCO3 = mass of salt × 100 ÷ molar mass of salt. If the mass is in mg per litre, the answer is in mg per litre of CaCO3, which is the same as ppm.

Conversion factors to CaCO3 equivalents
SaltMolar massFactor (100 ÷ M)Type of hardness
Ca(HCO3)21620.617Temporary
Mg(HCO3)21460.685Temporary
CaSO41360.735Permanent
MgSO41200.833Permanent
CaCl21110.901Permanent
MgCl2951.053Permanent
Mg(NO3)21480.676Permanent

Units of hardness

  • ppm: parts of CaCO3 per million parts of water. For water, 1 ppm = 1 mg/L.
  • Degree French (°Fr): parts per 100,000. 1 °Fr = 10 ppm.
  • Degree Clarke (°Cl): grains per imperial gallon, which is parts per 70,000. 1 °Cl = 14.3 ppm.
  • So 1 ppm = 1 mg/L = 0.1 °Fr = 0.07 °Cl.

Common traps

Sodium and potassium salts never count, however much is present: NaCl, KCl and Na2SO4 add nothing to hardness. A magnesium salt gives more hardness than the same mass of the matching calcium salt, because magnesium is lighter and so each milligram holds more ions. Finally, watch the volume: a mass given per 100 mL or per 500 mL must be converted to per litre before you call it ppm.

Worked example 1: a single salt

Water contains 16.2 mg/L of Ca(HCO3)2. Hardness = 16.2 × 100 ÷ 162 = 10 mg/L as CaCO3 = 10 ppm. This is temporary hardness.

Worked example 2: converting units

Water contains 12 mg/L of MgSO4. Hardness = 12 × 100 ÷ 120 = 10 ppm. In degrees French: 10 ÷ 10 = 1 °Fr. In degrees Clarke: 10 × 0.07 = 0.7 °Cl.

Worked example 3: watch the volume

A 100 mL sample contains 9.5 mg of MgCl2. Per litre this is 95 mg. Hardness = 95 × 100 ÷ 95 = 100 ppm, all permanent. A student who forgets to scale to a litre gets 10 ppm, a common wrong option.

Worked example 4: from degrees back to salt

A sample has a hardness of 7 °Cl, all from CaCl2. What mass of CaCl2 is in each litre? First to ppm: 7 × 14.3 ≈ 100 ppm. Then back to the salt: 100 × 111 ÷ 100 = 111 mg per litre.

Speed method

Learn the molar masses 162, 146, 136, 120, 111 and 95 as a set. Exam values are often chosen as simple fractions of these, such as 81 (half of 162) or 13.6 (a tenth of 136), so you can often see the answer at once: 81 mg/L of Ca(HCO3)2 is half a millimole per litre, which is 50 ppm.

Hardness as CaCO3 = mass of salt × 100 ÷ molar mass of salt. 1 ppm = 1 mg/L = 0.1 °Fr = 0.07 °Cl. Sodium and potassium salts never count.

— Rule to remember

Key takeaways

Convert every calcium and magnesium salt to CaCO3 equivalents before adding. Keep the factor table in memory, scale every mass to one litre, and ignore sodium and potassium salts. Unit conversions are simple multipliers: divide ppm by 10 for degrees French and multiply by 0.07 for degrees Clarke.

Check your understanding

  1. 1. Water contains 27.2 mg/L of CaSO4. What is its hardness in ppm as CaCO3?

    1. 20 ppm
    2. 27.2 ppm
    3. 13.6 ppm
    4. 40 ppm
    Show answer

    Answer: A. 27.2 × 100 ÷ 136 = 20 ppm.

  2. 2. A water sample has a hardness of 250 ppm. What is this in degrees French?

    1. 2.5 °Fr
    2. 25 °Fr
    3. 250 °Fr
    4. 17.5 °Fr
    Show answer

    Answer: B. 1 °Fr = 10 ppm, so 250 ÷ 10 = 25 °Fr.

  3. 3. Which dissolved salt does NOT contribute to hardness?

    1. MgCl2
    2. CaSO4
    3. Mg(HCO3)2
    4. NaCl
    Show answer

    Answer: D. Hardness comes only from calcium and magnesium salts. NaCl adds nothing.

  4. 4. Water contains 29.2 mg/L of Mg(HCO3)2. What is its hardness as CaCO3?

    1. 29.2 ppm
    2. 14.6 ppm
    3. 20 ppm
    4. 40 ppm
    Show answer

    Answer: C. 29.2 × 100 ÷ 146 = 20 ppm.

  5. 5. Equal masses of CaCl2 and MgCl2 are dissolved in equal volumes of water. Which statement is correct?

    1. CaCl2 gives more hardness because calcium is heavier
    2. MgCl2 gives more hardness because its molar mass is lower, so the same mass holds more ions
    3. Both give exactly the same hardness
    4. Neither causes hardness because chlorides are permanent
    Show answer

    Answer: B. Hardness ∝ mass ÷ molar mass. MgCl2 (95) has a lower molar mass than CaCl2 (111), so the same mass contains more Mg2+ ions and gives more hardness.

Privacy · Terms · Refunds · Delivery