- Practice
- About 16 min
- 5 practice questions
Lime-soda and zeolite calculations
Use the lime and soda formulae to find the chemicals needed for any volume of water, and use the 117/100 factor to solve zeolite regeneration problems in both directions.
If something looks wrong, please tell us.
The reactions of the previous lesson turn directly into two formulae for the lime-soda process and one factor for zeolite regeneration. Questions on these are among the most reliable scorers in water chemistry, provided the CaCO3 equivalents are found first and the units are handled carefully.
The two formulae
First express every hardness-causing salt as ppm of CaCO3. Then, for a volume V litres: Lime (Ca(OH)2) needed = 74/100 × [temporary Ca + 2 × temporary Mg + permanent Mg] × V mg. Soda (Na2CO3) needed = 106/100 × [permanent Ca + permanent Mg] × V mg. The factors 74/100 and 106/100 convert CaCO3 equivalents into masses of lime (74) and soda (106), because one Ca(OH)2 or one Na2CO3 handles the hardness of one CaCO3.
Each term comes from a reaction: temporary calcium uses one lime, temporary magnesium two, permanent magnesium one lime plus one soda, permanent calcium one soda. Sodium salts appear in neither bracket. If the lime or soda is impure, divide by the purity fraction at the end.
Worked example 1: a full lime-soda problem
Using the sample from lesson 2: temporary Ca (from Ca(HCO3)2) = 50 ppm, temporary Mg (from Mg(HCO3)2) = 50 ppm, permanent Ca (from CaSO4) = 100 ppm, permanent Mg (from MgCl2) = 100 ppm. Lime per litre = 0.74 × (50 + 2 × 50 + 100) = 0.74 × 250 = 185 mg. Soda per litre = 1.06 × (100 + 100) = 212 mg. For 10,000 L: lime = 1,850,000 mg = 1.85 kg and soda = 2,120,000 mg = 2.12 kg.
Suppose the lime available is only 92.5% pure. Mass of impure lime = 1.85 ÷ 0.925 = 2.0 kg. Purity always makes the quantity larger, never smaller; an option smaller than the pure figure is a trap.
Zeolite regeneration
Each Ca2+ taken up by the zeolite is released by two Na+ from brine, so the hardness equivalent to 100 g of CaCO3 needs 2 × 58.5 = 117 g of NaCl. Hence: NaCl needed = hardness removed (as CaCO3) × 117/100. Hardness removed = ppm × litres softened.
Worked example 2: salt for regeneration
A zeolite softener is exhausted after softening 5000 L of water of hardness 200 ppm. Hardness removed = 200 × 5000 = 1,000,000 mg = 1000 g of CaCO3. NaCl needed = 1000 × 117/100 = 1170 g. If the salt is supplied as a solution of 100 g/L, the volume needed is 11.7 L.
Worked example 3: working backwards
Regeneration of an exhausted zeolite needs 585 g of NaCl. It had softened water of hardness 250 ppm. How many litres did it soften? CaCO3 equivalent = 585 × 100/117 = 500 g = 500,000 mg. Volume = 500,000 ÷ 250 = 2000 L.
| Quantity | Multiply CaCO3 equivalent by |
|---|---|
| Lime, Ca(OH)2 | 74/100 |
| Soda, Na2CO3 | 106/100 |
| Salt for zeolite, NaCl | 117/100 |
| Back to a salt such as MgSO4 | M/100 |
Speed method and traps
Fill in the brackets first, using the T and P labels from lesson 2, and only then multiply by the factor and the volume. The common errors are: counting temporary magnesium once instead of twice in the lime bracket; putting temporary hardness into the soda bracket; forgetting that permanent magnesium belongs in both brackets; and confusing mg with g when the volume runs into thousands of litres.
Lime = 0.74 × [temp Ca + 2 temp Mg + perm Mg] × V. Soda = 1.06 × [perm Ca + perm Mg] × V. Zeolite salt = 1.17 × (ppm × V). All hardness as CaCO3; answers in mg.
Key takeaways
Lime-soda problems are two brackets and two factors. Zeolite problems are one factor, 117/100, in either direction. Convert salts to CaCO3 first, multiply by the volume, convert milligrams to kilograms at the end, and divide by purity if the chemical is not pure.
Check your understanding
-
1. Water has 100 ppm temporary hardness, all from Ca(HCO3)2. How much lime is needed per litre?
- 74 mg
- 100 mg
- 106 mg
- 148 mg
Show answer
Answer: A. Lime = 0.74 × 100 = 74 mg per litre. No soda is needed.
-
2. Water has only 50 ppm temporary hardness from Mg(HCO3)2. How much lime is needed per litre?
- 37 mg
- 74 mg
- 53 mg
- 148 mg
Show answer
Answer: B. Temporary Mg counts twice: 0.74 × (2 × 50) = 74 mg.
-
3. 1000 L of water has permanent hardness of 100 ppm from CaSO4 and 50 ppm from MgSO4. How much soda is needed?
- 111 g
- 106 g
- 159 g
- 159 mg
Show answer
Answer: C. Soda = 1.06 × (100 + 50) × 1000 mg = 159,000 mg = 159 g.
-
4. A zeolite softener softens 1000 L of water of hardness 300 ppm. How much NaCl is needed to regenerate it?
- 300 g
- 585 g
- 175.5 g
- 351 g
Show answer
Answer: D. Hardness removed = 300 × 1000 = 300,000 mg = 300 g CaCO3. NaCl = 300 × 117/100 = 351 g.
-
5. Which kind of hardness appears in BOTH the lime bracket and the soda bracket?
- Temporary calcium
- Permanent magnesium
- Permanent calcium
- Temporary magnesium
Show answer
Answer: B. Permanent Mg needs lime to precipitate Mg(OH)2, which forms an equal amount of Ca salt that soda must remove. So it is in both brackets.
Sign in to keep track of the lessons you finish.