• Practice
  • About 25 min
  • 15 practice questions

Final self-assessment: Water chemistry practice

Test yourself on the whole course: 15 questions with answers explained.

If something looks wrong, please tell us.

Attempt all 15 questions without looking back, writing down your working, and only then check the answers and explanations. These questions are harder on average than the lesson checks and include the usual traps: sodium salts in the list, volumes other than a litre, and dilution factors.

Final self-assessment

  1. 1. Water contains 40.5 mg/L of Ca(HCO3)2. What is its hardness in degrees French?

    1. 2.5 °Fr
    2. 25 °Fr
    3. 4.05 °Fr
    4. 1.75 °Fr
    Show answer

    Answer: A. 40.5 × 100/162 = 25 ppm. 1 °Fr = 10 ppm, so 2.5 °Fr.

  2. 2. Water contains 19 mg/L of MgCl2 and 11.1 mg/L of CaCl2. What is its hardness?

    1. 30.1 ppm
    2. 20 ppm
    3. 30 ppm
    4. 10 ppm
    Show answer

    Answer: C. MgCl2: 19 × 100/95 = 20. CaCl2: 11.1 × 100/111 = 10. Total 30 ppm (both permanent).

  3. 3. Which salt gives the greatest hardness when 100 mg is dissolved in a litre of water?

    1. CaSO4
    2. MgCl2
    3. Ca(HCO3)2
    4. MgSO4
    Show answer

    Answer: B. Hardness = 100 × 100/M, largest for the smallest M. MgCl2 (95) gives 105 ppm; MgSO4 83 ppm; CaSO4 74 ppm; Ca(HCO3)2 62 ppm.

  4. 4. Water contains per litre: Mg(HCO3)2 14.6 mg, CaCl2 22.2 mg, MgSO4 6.0 mg, NaCl 11.7 mg. What is its permanent hardness?

    1. 35 ppm
    2. 20 ppm
    3. 36.7 ppm
    4. 25 ppm
    Show answer

    Answer: D. Permanent: CaCl2 22.2 × 100/111 = 20; MgSO4 6 × 100/120 = 5. Sum 25 ppm. Mg(HCO3)2 is temporary; NaCl does not count.

  5. 5. For the same water (Mg(HCO3)2 14.6, CaCl2 22.2, MgSO4 6.0, NaCl 11.7 mg/L), what is the total hardness?

    1. 35 ppm
    2. 46.7 ppm
    3. 45 ppm
    4. 25 ppm
    Show answer

    Answer: A. Temporary: 14.6 × 100/146 = 10. Permanent: 25. Total = 35 ppm.

  6. 6. 1500 L of water has 120 ppm temporary hardness, all from Ca(HCO3)2. What mass of CaCO3 forms on complete boiling?

    1. 120 g
    2. 180 g
    3. 291.6 g
    4. 18 g
    Show answer

    Answer: B. Hardness is already as CaCO3 and each Ca(HCO3)2 gives one CaCO3: 120 mg/L × 1500 L = 180,000 mg = 180 g.

  7. 7. Water containing Mg(HCO3)2 and CaCl2 is softened with sodium zeolite. The softened water contains

    1. Mg(HCO3)2 and NaCl
    2. CaCl2 and NaHCO3
    3. NaHCO3 and NaCl
    4. no dissolved salts
    Show answer

    Answer: C. Zeolite replaces Mg2+ and Ca2+ by Na+; the anions stay, giving NaHCO3 and NaCl.

  8. 8. Which treatment gives water almost free of dissolved ions?

    1. Boiling and filtering
    2. Lime-soda process
    3. Sodium zeolite
    4. A cation resin in H+ form followed by an anion resin in OH− form
    Show answer

    Answer: D. Only the two-resin method removes both cations and anions (H+ and OH− combine to water). The others leave sodium salts or residual ions.

  9. 9. In the lime-soda process, what is needed to remove 1 mol of MgSO4?

    1. 1 mol lime only
    2. 1 mol soda only
    3. 1 mol lime and 1 mol soda
    4. 2 mol lime and 1 mol soda
    Show answer

    Answer: C. MgSO4 + Ca(OH)2 → Mg(OH)2 + CaSO4, then CaSO4 + Na2CO3 → CaCO3 + Na2SO4. One lime and one soda.

  10. 10. Water contains per litre: Ca(HCO3)2 16.2 mg, Mg(HCO3)2 14.6 mg, MgSO4 12 mg, CaSO4 13.6 mg. How much lime is needed for 50,000 L?

    1. 1.48 kg
    2. 1.11 kg
    3. 2.22 kg
    4. 0.74 kg
    Show answer

    Answer: A. Each salt is 10 ppm as CaCO3. Lime = 0.74 × (10 + 2 × 10 + 10) = 29.6 mg/L. × 50,000 = 1,480,000 mg = 1.48 kg.

  11. 11. For the same water and volume, how much soda is needed?

    1. 2.12 kg
    2. 1.06 kg
    3. 0.53 kg
    4. 1.59 kg
    Show answer

    Answer: B. Soda = 1.06 × (perm Ca 10 + perm Mg 10) = 21.2 mg/L. × 50,000 = 1,060,000 mg = 1.06 kg.

  12. 12. A zeolite bed exhausted after softening 4000 L is regenerated with 10 L of brine containing 117 g of NaCl per litre. What was the hardness of the water?

    1. 117 ppm
    2. 292.5 ppm
    3. 500 ppm
    4. 250 ppm
    Show answer

    Answer: D. NaCl = 1170 g, equivalent to 1170 × 100/117 = 1000 g CaCO3 = 1,000,000 mg. ÷ 4000 L = 250 ppm.

  13. 13. 50 mL of water needs 12.5 mL of 0.02 M EDTA. What is its hardness?

    1. 250 ppm
    2. 500 ppm
    3. 125 ppm
    4. 1000 ppm
    Show answer

    Answer: B. 12.5 × 0.02 × 100 × 1000 ÷ 50 = 500 ppm.

  14. 14. 1 mL of an EDTA solution is equivalent to 1.5 mg of CaCO3. A 100 mL water sample needs 20 mL of it. What is the hardness?

    1. 150 ppm
    2. 30 ppm
    3. 300 ppm
    4. 600 ppm
    Show answer

    Answer: C. 20 × 1.5 = 30 mg CaCO3 in 100 mL. Per litre: 30 × 1000/100 = 300 ppm.

  15. 15. 2 mL of a waste-water sample is made up to 300 mL. DO falls from 8.2 mg/L to 6.2 mg/L in the test. What is the BOD?

    1. 300 mg/L
    2. 2 mg/L
    3. 150 mg/L
    4. 600 mg/L
    Show answer

    Answer: A. Dilution factor = 300 ÷ 2 = 150. BOD = (8.2 − 6.2) × 150 = 300 mg/L.

Questions 1-3: lesson 1 (CaCO3 equivalents and units). Questions 4-6: lesson 2 (temporary, permanent and total hardness). Questions 7-9: lesson 3 (softening methods and their reactions). Questions 10-12: lesson 4 (lime-soda and zeolite calculations). Questions 13-15: lesson 5 (EDTA titration and BOD). Revisit the lesson for any group where you missed more than one.

Privacy · Terms · Refunds · Delivery