- Practice
- About 14 min
- 5 practice questions
Hardness of blended waters, daily loads and partial softening
Calculate the hardness of mixed supplies, the blend needed to reach a target hardness, the daily hardness load on a softener and the saving from softening only part of the flow.
If something looks wrong, please tell us.
Real supplies often combine water from two sources, or soften only part of the flow and blend it back. Exam questions turn this into arithmetic on ppm and volumes. The one rule that runs through every question is that hardness, as mg of CaCO3 equivalent, is an amount, so amounts add; concentrations (ppm) do not add unless you weight them by volume. All values below are illustrative practice values.
The weighted average
When waters of hardness H1 and H2 (ppm) in volumes V1 and V2 are mixed, the hardness of the mixture is H = (H1V1 + H2V2) ÷ (V1 + V2). Each product H × V, with H in mg/L and V in litres, is the mass in milligrams of hardness (as CaCO3). The result must lie between H1 and H2, and nearer to the one with the larger volume.
Worked example 1: blending two sources
300 L of water of 200 ppm is mixed with 700 L of water of 50 ppm. Hardness mass = 300 × 200 + 700 × 50 = 60,000 + 35,000 = 95,000 mg. Volume = 1000 L. H = 95,000 ÷ 1000 = 95 ppm. The plain average (125 ppm) is wrong because the volumes are unequal.
Worked example 2: blend for a target
What fraction of 200 ppm water must be mixed with 50 ppm water to give 100 ppm? Let x be the fraction of hard water. 200x + 50(1 − x) = 100 gives 150x = 50 and x = 1/3. So the ratio hard : soft is 1 : 2. For 600 L of product, that is 200 L of hard water and 400 L of soft water. A quick check: (200 × 200 + 400 × 50) ÷ 600 = 60,000 ÷ 600 = 100 ppm.
Worked example 3: mixing unlike salts
Water A has 81 mg/L of Ca(HCO3)2 and water B has 111 mg/L of CaCl2. Equal volumes are mixed. Convert first: A = 81 × 100 ÷ 162 = 50 ppm (temporary); B = 111 × 100 ÷ 111 = 100 ppm (permanent). After mixing, each is halved by dilution: temporary 25 ppm, permanent 50 ppm, total 75 ppm. The permanent hardness is 50 ppm, not 100 ppm, because the CaCl2 solution has been diluted to half.
Worked example 4: the daily load on a softener
A softener treats 2000 L/h of water of 250 ppm for 8 hours. Volume = 2000 × 8 = 16,000 L. Hardness removed = 250 mg/L × 16,000 L = 4,000,000 mg = 4.0 kg as CaCO3. If it is a zeolite softener regenerated with salt at 117 g NaCl per 100 g CaCO3, the salt for one day's load = 4.0 × 1.17 = 4.68 kg.
Worked example 5: partial softening
Raw water has hardness 300 ppm. It is softened completely (to about 0 ppm) and blended with raw water to give 10,000 L of product at 60 ppm. Fraction of raw water = 60 ÷ 300 = 0.2, so 2000 L of raw water and 8000 L of softened water are needed. Only 8000 L needs softening. Hardness removed = 8000 × 300 = 2,400,000 mg = 2.4 kg, which needs 2.4 × 1.17 = 2.81 kg of salt. Softening all 10,000 L would remove 3.0 kg and need 3.51 kg of salt. Blending saves 0.70 kg of salt per batch.
Hardness adds as mass: H × V. Mixture = total mass ÷ total volume. For a target, solve H = xH1 + (1 − x)H2. Dilution halves the hardness of each water when equal volumes are mixed.
Key takeaways
- Weight each hardness by its volume; never average ppm values of unequal volumes.
- Check that a blended answer lies between the two sources.
- Daily load = ppm × litres, divided by 10^6 for kg.
- Blending softened and raw water reduces the amount of salt or chemicals needed.
Check your understanding
-
1. 400 L of water of 300 ppm is mixed with 600 L of water of 100 ppm. The hardness of the mixture is:
- 200 ppm
- 180 ppm
- 220 ppm
- 150 ppm
Show answer
Answer: B. Mass = 400 × 300 + 600 × 100 = 180,000 mg in 1000 L, so 180 ppm.
-
2. Water of 200 ppm is mixed with water of 50 ppm to give 125 ppm. The volumes needed are in the ratio (hard : soft):
- 1 : 1
- 1 : 2
- 2 : 1
- 1 : 3
Show answer
Answer: A. 200x + 50(1 − x) = 125 gives x = 0.5, so the volumes are equal.
-
3. A softener treats 3000 L/h of 200 ppm water for 10 hours. The hardness removed (as CaCO3) is:
- 600 g
- 60 kg
- 6.0 kg
- 600 kg
Show answer
Answer: C. Volume = 30,000 L; hardness = 200 mg/L × 30,000 L = 6,000,000 mg = 6.0 kg.
-
4. Equal volumes of water with 81 mg/L Ca(HCO3)2 and water with 111 mg/L CaCl2 are mixed. The permanent hardness of the mixture is:
- 100 ppm
- 25 ppm
- 75 ppm
- 50 ppm
Show answer
Answer: D. CaCl2 gives 100 ppm as CaCO3; after mixing equal volumes it is halved to 50 ppm.
-
5. 10,000 L of 60 ppm water is made by blending fully softened water with raw water of 300 ppm. The volume of softened water needed is:
- 2000 L
- 5000 L
- 8000 L
- 6000 L
Show answer
Answer: C. Raw fraction = 60 ÷ 300 = 0.2, so raw = 2000 L and softened = 8000 L.
Sign in to keep track of the lessons you finish.